Table of Contents
Advertisement
To enable or disable the PIN code lock,
1
Press
2
Select Security.
If already off, PIN enable will show.
If already on, PIN disable and PIN change will show.
Press Select
3
Press OK
4
PIN enabled or PIN disabled briefly displayed will con-
firm your action.
Press Back
5
To change the PIN code (PIN lock must first be enabled),
Press
1
2
Select Security.
3
Select PIN change and follow the display prompts.
Press OK
4
Press Back
5
PIN2 code
The PIN2 code prevents unauthorized access to some features such as
turning on or off FDN operations, modifying the FDN Phone Book, setting
calls costs to zero, or modifying the costs display. It can be changed but
not turned on or off.
To change the PIN2 code,
1
Press
2
Select Security.
3
Select PIN2 change and follow the display prompts.
4
Press OK
Press Back
5
PUK code
The PUK (PIN unblock key) 'unblocks' a PIN whose code has been entered
incorrectly three times. This 8-digit code, supplied by your network
provider, cannot be changed.
When requested, enter the PUK code and press OK
a new PIN code. Follow the display prompts to reset the PIN code.
✱
. Select Settings.
and follow the display prompts.
to confirm.
or
. Select Settings.
to confirm your new PIN. Confirmation will display.
or
. Select Settings.
to confirm your new PIN2 code.
or
If you enter the wrong PUK code 10 times in a row, your SIM card cannot be used again.
Contact your service provider for a new card.
to return to the standby display.
to return to the standby display.
to return to the standby display.
. Then you must enter
61
Advertisement
Table of Contents
