Table of Contents
Advertisement
Action when receiving a second call
When a second call comes in, you will hear a 'double beep'; and an
animated phone icon and the phone number (if available) will display.
Either press
Reject
to send the incoming call to voice mail. Press
between the two calls. Press Replace
incoming call. See the previous page to end one or both calls.
Multi-party or conference calls
This feature allows you to make or receive between 2 to 5 calls at the same
time with all parties being able to hear and talk with each other.
1
Make and establish a call and press
Enter another number and press
2
on hold while the second call becomes active.
Press Options
3
Option
Auto-DTMF
Swap
Join
Mute/Unmute
Hold/Retrieve
Private with
End held
End active
End one
End all
Throughout the call, the display confirms the actions you have selected.
✱
to answer the call and put the first call on hold or press
Confer-
Non-con-
ence
ference
•
•
•
•
•
•
For alternate line service (ALS) subscribers, conference calls cannot be made between Line 1 and
Line 2. For details, see Alternate line service on page 45.
to end the first call and take the
for these options:
Allows a DTMF string to be entered
•
to the active call only
•
Swaps between active and call on hold
Joins active and call on hold to make
a multi-party or conference call
•
Turns on or off the microphone
Holds or retrieves the conference call
Allows you to select and have a
private conversation with one of
the conference callers while
putting all the other calls on hold
•
Ends the call on hold
Ends active call and connects with
•
call on hold
Allows you to select and end one
of the conference call participants
•
Ends all the calls
to swap
.
. The first call will be put
Description
25
Advertisement
Table of Contents
