Table of Contents
Advertisement
Basic phone operations
Turning on the phone
1
Press and hold
2
If the phone is locked, Enter lockcode will display. Enter
the 4 digit code and press OK
3
If your SIM is PIN protected, Enter PIN will display.
Enter the PIN code and press OK
✱
Standby display
A screen animation appears, followed by a registration tone, then the
name of the network and/or service provider displays together with signal
and battery level indicators and the SMS and Lock softkey functions.
This is the normal standby display:
Model G310
Press
Press
Press
Press
For Model G340, see page 63 to set time and date.
Making a call
Enter the telephone number you wish to dial.
1
Correct any mistakes by pressing Clear
this key to erase the entire entry.
2
Press
✱
International calls can be prefixed either with 00 or +. To enter the + symbol
before a number, press and hold
When the call connects, the call timer displays.
• Busy Called party's line is busy. If Auto Retry is on, the phone
will attempt to call again (see page 59 for details).
• Not allowed (fixed dialing) Number dialed is not authorized
by the FDN list (see page 36 for details).
• Line 2 icon (
ing call was made using this line (see page 45 for details).
. A turn on tone sounds.
See pages 19 and 59 for more details on your PIN and lock codes.
to go to your Phone Book (see page 33).
to go to the phone menu (see page 26).
to go to volume control (see page 56).
to silence the incoming ring tone.
to dial (send) the number .
For best results use the antenna fully extended when making or receiving calls.
) appears when call connects (if active) indicat-
.
.
Model G340
until + appears in the display.
. Press and hold
13
Advertisement
Table of Contents
