PANASTEREO CX230 CINEMA MONITOR
35. Select the pink noise generator to RIGHT SURROUND.
36. Check the SPL reading on the RTA. It should be 85dB. If not, check the B-Chain alignment of
the sound processor.
37. Select the "SOURCE" switch to "AMPS", and select "RIGHT SURROUND".
38. Adjust the "AMPLIFIERS - RS" trimpot so that the CX230 sound level meter reads 85db.
39. Select the "SOURCE" switch to "PROC".
40. Adjust the "Processor - RS" trimpot so that the CX230 sound level meter reads 85db.
The CX230 alignment is now complete.