Receiving A Call; Answering The Call; Ending A Call - Mitsubishi ODYSSEY User Manual

The phone rings and the call connects like a normal telephone. A call timer
appears.
You can also get the following messages if the call does not connect or you
use the second line:
(fixed dialling)
If the dialled number matches one stored in the phone book then the name
of the called person appears in the display.

Receiving a call

The phone rings (or vibrates, see page 37 to set) when it receives a call. See
page 38 to set the incoming ring tone. See page 39 to set the backlight.

Answering the call

Press
No ring
Pressing No ring
for example, go out of a room before pressing
Service number presentation
If you have the service number presentation your phone displays the fol-
lowing information.
Unknown number, then Call1
when connected
the caller's number
Withheld number, then Call1
when connected
If you have a second line,
line 2 number (see page 20 for details).
Rejecting the call
To reject, or return a busy signal to the caller:
Press

Ending a call

Press
10
You can prefix international calls with 00 or +. To enter the + symbol before a number press
and hold down
Your phone
displays...
Busy
called party is engaged.
Not allowed
number dialled is not authorised by the FDN list (see
page 28).
call is made using the second line (see page 36).
.
If the ring tone volume is set to zero (off) or if the phone has been set to 'Vibrate' mode, no audi-
ble sound is heard.
stops the sound of the ring tone, which allows you to,
Your phone displays...
.
. The call timer stops and
.
if the...
unavailable.
available but not in phone books.
withheld.
appears if the call has been received on your
disappears.
.
if the number is...