2D Map Screen - Mio 200 Series User Manual

Mio Moov 200-Series, 300-Series | How do I view my route?

2D Map screen

The 2D Map screen shows your current position (if a GPS fix is active) and surrounding street names. If a route has
been calculated, the route and turns are highlighted. The 2D Map screen follows your direction of travel unless the
Map Display preference is set to North (see "Map Display" page 69).
Tap and drag the screen, to move across the map.
Tap the map, to view the Map Menu (see "How do I use the Map Menu?" on page 57).
Note: Depending on the country you are travelling in, the color of the direction and distance buttons may differ from the above example.
Item
Next instruction
Direction and
distance of next
turn
Route
Current position
Status bar
Main Menu
Distance and Time
Information
Cancel route
Description
The direction and name of the street to turn in to.
The direction and distance of your next turn.
Note: To repeat the spoken prompt of your next turn, tap the turn arrow.
Your current route is highlighted.
Your current position is marked with
Displays one of the following:
The name of the street you are located on
Speed warnings
Active POIs.
Tap to display the Main Menu screen.
Note: The Status Bar is replaced by current Traffic events, when Traffic is enabled. For more
information, see "Traffic" on page 57.
The Main Menu button allows you to enter an address for your destination, customize
preferences, receive updated traffic information and make and receive phone calls.
Tap to expand and see the following options:
Time
km/h or mph (Speed)
TTG (Time to Go)
DTG (Distance to Go)
ETA (Estimated Time of Arrival).
Tap to cycle through the options.
Note: During a Multi-stop trip, Time to Go, Distance to Go and ETA will display as: Time to
Waypoint, Distance to Waypoint and ETA at Waypoint.
Cancels your current route.
.
36