Panasonic NV-HS820EE Operating Instructions Manual page 8

If you are connecting your VCR to a TV using only RF coaxial
cable, then follow the steps. (RF Connection)
RF Coaxial cable must be connected to watch TV channels.
– When [Россия] (Russia) is selected in the Country setting
menu, the names of TV stations may not be correctly
displayed and the Auto Clock Setting does not work.
1
2
1 Aerial Input socket
2 Aerial Output socket
3 Aerial (not supplied)
4 Aerial lead (not supplied)
Press the [VCR-ON/OFF] button
Í
to turn on the VCR and tune
your TV until the Country setting
menu appears on the TV
screen.
Press the [Cursor] buttons 3421.
Select the country where you are using the VCR.
Press the [OK] button.
OK
The VCR's Auto Setup automatically starts and tunes all
available TV stations and also sets the clock. This takes
about 5 minutes.
When the indication appears on
the VCR display, the Auto Setup
is complete.
If, after setup, the picture on the video playback channel
is distorted, change the RF output channel on the VCR to
another number.
Press the [MENU] button for more than 5 seconds.
MENU
The RF output channel number appears on the VCR
display.
The initial setting is channel 38.
Press the [Numeric] buttons or
[Channel] button.
Change the RF output channel.
Enter a channel number which differs by 2 or 3 from the
one initially set number. For example, as the original
number is 38, enter 41.
Retune your TV to the VCR's new RF output channel.
Press the [OK] button to conclude the setting.
OK
To cancel the Auto Setup before it has finished
EXIT
Press the [EXIT] button .
8
3
4
5
6
7
5 TV (not supplied)
6 Aerial Input socket
7 RF Coaxial cable (supplied)
Panasonic VCR
Country
Deutschland Polska
Česká Rep. Россия
Magyarország others
When the clock setting menu appears after Auto Setup
has finished
Press the [Cursor] buttons 3421 to set the correct
time and date.
Press the [OK] button to conclude the setting.
OK
To confirm that the TV stations have been tuned correctly
by the Auto Setup function
See page 18.
When no station has been set, confirm all connections of
the VCR again and restart the Auto Setup
See page 19.
When the station names and/or channel numbers have
not been set correctly
See page 18.