Accessories / Options
Standard accessories
Remote Control
Transmitter
•
EUR7651110
Operating Instructions
Pan European Guarantee Card
Installing remote's batteries
1
2
+
Note the correct
polarity (+ or -)
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
•
Do not burn or breakup batteries.
Optional accessories
Wall-hanging
bracket
TY-WK32LR2W
WARNING!
•
Failure to use a Panasonic bracket or choosing to mount
the unit yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer
mount your unit will void your warranty.
•
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury
and product damage.
•
Do not mount the unit directly below ceiling lights (such as
spotlights, floodlights or halogen lights) which typically give off
high heat. Doing so may warp or damage plastic cabinet parts.
•
Take care when fi xing wall brackets to the wall. Always ensure that there
are no electrical cables or pipes in the wall before hanging bracket.
6
Check that you have the accessories and items shown
OK
1
2
3
4
5
6
7
8
9
0
TV
Pull
open
Hook
Close
-
+
-
Batteries for the Remote
Control Transmitter
(2)
•
R6 (UM3)
1 Year Guarantee Registration
CRM (Customer Relationship Management)
Using the clamper
Rear of the TV
Clamper
(Standard accessory)
To tighten:
To loosen:
Keep the
knob pressed
•
Do not bundle the RF cable and mains lead together (could cause distorted image).
•
Fix cables with clampers as necessary.
•
When using the optional accessory, follow the option's assembly
manual to fix cables.
Please contact your nearest Panasonic dealer to purchase the
recommended wall-hanging bracket. For additional details, please
refer to the wall-hanging bracket installation manual.
Clamper
•
TMM8E18048
Bundle the
cables:
Lock
Hook the
clamper:
How to remove the TV Stand
Remove four screws.
Rear of the TV
Clamper
that bundle
mains lead
Tight