Makita 6826 Instruction Manual page 6

1
A
B
1. Reversing switch lever
A
1. Hook
ASSEMBLY
1
1. Locator
2. Locking sleeve
6
Reversing switch action
002635
CAUTION:
• Always check the direction of rotation before operation.
• Use the reversing switch only after the tool comes to a complete stop.
Changing the direction of rotation before the tool stops may damage the
tool.
This tool has a reversing switch to change the direction of rotation. Move the
reversing switch lever to the
position (B side) for counterclockwise rotation.
Hook
002644
The hook is convenient for temporarily hanging the tool.
1 When using the hook, pull it out in "A" direction and then push it in "B" direction
to secure in place.
When not using the hook, return it back to its initial position by following the
above procedures in reverse.
002645
B
CAUTION:
• Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing or removing the bit
To remove the magnetic socket bit, first pull the locator out of the locking
002654
sleeve. Then pull the magnetic socket bit.
2
position (A side) for clockwise rotation or the