Watching Vcr, Dvd And Satellites - Panasonic Viera TX-26LM70LA Operating Instructions Manual

Watching VCR, DVD and Satellites

The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD
(Digital Versatile Disc) equipment.
Connect the Satellite receiver and you can watch satellite broadcasts.To connect the equipment (p. 8)
TV/AV
OK
REC
VCR DVD
PROGRAMME
TV
To return to TV
TV/AV
Panasonic equipment connected to the TV can be directly operated with the remote control.
VCR / DVD switch
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
The remote control will be available for various
Panasonic equipment with the following settings.
Switch to select VCR or DVD you want to change
Press and hold
Enter the code below (two digit code)
Press
14 14
Turn the TV on
1
When connecting with SCART as example 2 or 3 (p. 8 and p. 9)
Receives input signals automatically when playback starts or
satellite receiver is switched on
•
Input signals are automatically identifi ed by the SCART (pin 8) terminal.
•
This function will be available for HDMI connection too (p. 23).
If input mode is not switched automatically
Perform
•
Dependant on DVD/VCR setup
Select the external input
2
TV/AV
Select the connector
3
connected to the equipment
red
AV1
•
example: AV1
•
When colour bar disappears
•
You can also select the connector using the TV/AV button on the front panel of the TV.
Press the button repeatedly until you reach the connector to view.
Note
•
If the external equipment has an aspect adjustment function, set to "16:9".
•
For details, see the manual of the equipment or ask your local dealer.
•
HDMI (p. 23)
Press and hold to search backward
while operating
and
Terminal
Manual input
selection
NEXT Auto input
selection
(AV mode screen)
blue
red
NEXT
green
yellow
AV2/ AV3/
S-video S-video
red
Note
•
After setting, execute operation confi rmation.
•
The respective VCR / DVD code is turned to the default
when battery has been exchanged. Set it again.
•
Depending on the model, operation may not be possible.
VCR
Equipment
VCR
DVD
Screen display
AV1 AV2 AV3
AV2 AV3
AV2S AV3S
AV1
(S-video input) (S-video input)
EC1/RGB EC2/RGB
AV1/RGB AV2/RGB
(RGB input) (RGB input)
Displays the selected connector
BACK Component
yellow blue
Component HDMI1/
HDMI2
Component
yellow
blue
Press any coloured buttons
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
DVD
Code Equipment
10 (default) DVD
Player theatre
11
Component HDMI1 HDMI2
Component HDMI1 HDMI2
HDMI1 HDMI2
HDMI1/2
Code
70 (default)
71