Panasonic Viera TX-26LM70L Operating Instructions Manual page 25

Automatic Input switching-When the connected Panasonic equipment is operated,
Easy
input mode is switched automatically. When it is stopped operating, input mode is
playback
returned.
You can control the theatre speaker with TV's remote control.
This function is available when Panasonic Amplifi er or Player theatre is connected.
Display the menu
Select "Home theatre" or "TV speaker"
M a i n m en u
H om e t h e at re
P i c t ure m en u
Theatre
S o un d m en u
S e tu p m en u
speaker
•
When selecting "Home theatre", the sound of TV speakers is mute.
•
When the equipment is turned off, TV speakers will be active.
When the connected Panasonic equipment starts playback or direct navigator or
Power on
function menu are activated, the TV is automatically turned on. (Only when TV is
link
in Standby mode.)
Power off
When TV is set to Standby mode, the connected Panasonic equipment is also
link
automatically set to Standby.
Note
•
Setup the equipment to enable this function. Read the manual of the equipment.
•
This function may not work normally depending on the equipment condition.
•
Image or sound may not be available for the fi rst few seconds when the playback starts.
•
Image or sound may not be available for the fi rst few seconds when Input mode is switched.
•
Volume function will be displayed when adjusting the volume of the equipment.
•
Easy playback is also available by using the remote control for Amplifi er. Read the manuals of Amplifi er.
MENU
access
OK
select
Home theatre:
Adjustment for equipment
(automatically turned on if it is in
Standby mode)
Volume up / down
Mute
TV speaker:
TV speakers are active.
25