Mio Digi Walker P360 User Manual page 72

Reset your Pocket PC before connecting the cable. (See Section 7.1.)
Always disconnect your Pocket PC before you restart your desktop
computer.
Connect only one Pocket PC or personal digital assistant to your desktop
computer at a time.
Network Connection Problems
Make sure that you have added necessary server information.
If is not listed as a connection method in the ActiveSync
Network Connection
dialog box when starting synchronization, wait a few minutes and try again.
Also, if synchronization does not start right away, the network is probably
busy, and it may take a minute for your Pocket PC to connect to the network.
Verify with your network administrator that your user name and password
are correct.
Verify with your network administrator that the network you are trying to
connect to is available, to try to connect to it from another computer.
You may need to change the device name if you are trying to connect to a
network and cannot because another device with the same name is already
connected. To change the device name, tap
Settings System About
.
Device ID
66