1. Manuals
  2. Brands
  3. Cubitech Manuals
  4. DVR
  5. 4CH Triplex
  6. User manual

Cubitech 4CH Triplex User Manual

4/8/16ch triplex digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
4/8/16CH Triplex DVR
User Guide
.
INFORMATION MAY CHANGE WITHOUT NOTICE
Digital Video Recorder

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4CH Triplex and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cubitech 4CH Triplex

Summary of Contents for Cubitech 4CH Triplex

  • Page 1 4/8/16CH Triplex DVR User Guide INFORMATION MAY CHANGE WITHOUT NOTICE Digital Video Recorder...

  • Page 2: Table Of Contents

    4/8/16CH Triplex DVR Table of Contents Product Overview ..................7 Product Outline ..................8 Front Panel ....................8 3.1. The slim model (4/8CH DVR) ............8 3.2. The removable drive (CD-ROM/DVD-ROM) model (4/8CH DVR) ... 9 3.3. 16CH DVR ..................9 Rear Panel ....................11 IR Remote Controller ................13 Install the disk drives ................15...
  • Page 3 4/8/16CH Triplex DVR 8.1. 4 CH Triplex DVR ................26 8.2. 8 CH Triplex DVR ................26 8.3. 16 CH Triplex DVR................26 Commands ....................28 1.1. Operating Buttons................28 1.2. Mouse Operating ................28 1.3. State Information ................29 1.4. Icons ....................29 Main Menu ....................31 Channel Setup ..................32 3.1.
  • Page 4 4/8/16CH Triplex DVR 7.2. Hard Drive Setup ................48 7.3. Network Setup .................49 7.4. Screen Setup ...................52 7.5. Audio Setup ..................53 7.6. Keyboard/PTZ Setup ...............54 7.7. Firmware Update ................55 7.8. Load Default Setting ...............57 Language Selection .................58 Exit Main Menu ..................58 9.1.

  • Page 5: Playback

    4/8/16CH Triplex DVR Name Server .....................83 PC Capturing ....................84 Playback ....................86 DVR Connect ....................91 Login Setup ....................94 Language ....................94 Help ......................94 Exit ......................95 Digital Video Recorder...

  • Page 6: C A U T I O N

    4/8/16CH Triplex DVR  For your safety, unplugging the power before moving the DVR, installing, or replacing any parts or hard drive.  Make sure all the power cable and wires are properly set up before using the DVR.  To avoid a short circuit, don’t leave any unnecessary parts inside the DVR.

  • Page 7: I N T R O D U C T I O N

    4/8/16CH Triplex DVR Product Overview  High quality pictures by digital recording with 4/8/16 video inputs (NTSC/PAL)  Provides one VGA and S-video/video-in*2 for video output and two audio inputs  Triplex operations : Recording / Playback / Remote Backup ...

  • Page 8: Product Outline

    4/8/16CH Triplex DVR  Dimension(W idth x Height x Depth): 290x52x220mm (4/8CH DVR with one 3.5”HDD) 340x60x280mm (4/8CH DVR with Removable HDD+3.5”HDD) 430x80x320mm (16CH DVR)  Display/Recording frame rate and resolution : Models 4CH DVR 8CH DVR 16CH DVR Display Frame Rate 120/100fps 240/200fps 480/400fps...

  • Page 9: The Removable Drive (Cd-Rom/Dvd-Rom) Model (4/8Ch Dvr)

    4/8/16CH Triplex DVR (Type III) 3.2. The removable drive (CD-ROM/DVD-ROM) model (4/8CH DVR) -with one front-accessible disk drive (or CD-ROM/DVD-ROM) and one internal HDD 3.3. 16CH DVR Controls: Name Function  REW Backward search through a time-shifted or recorded video. II/...
  • Page 10 4/8/16CH Triplex DVR  MENU Enter menu or back to previous menu list..  / UP Moves up through the list of menu. Also used to select menu options or change the DVR configuration values. Or Enter Event Search Menu. ...

  • Page 11: Rear Panel

    4/8/16CH Triplex DVR Rear Panel 4 CH Triplex DVR (with Removable Disk Drive) 4 CH Triplex DVR (without Removable Disk Drive) 8 CH Triplex DVR (with Removable Disk Drive) Digital Video Recorder...
  • Page 12 4/8/16CH Triplex DVR 8 CH Triplex DVR (without Removable Disk Drive, without Sensor/Alarm) 16 CH Triplex DVR Function IR Extender connector (Optional) VGA Display Connector (DB-9) AUDIO-IN POWER ON/OFF Switch USB PORT (dedicated Only for Mouse Connection, must connect at the beginning of Power On) S-VIDEO VIDEO OUT (Monitor)

  • Page 13: Ir Remote Controller

    4/8/16CH Triplex DVR SPOT MONITOR IR Remote Controller DVR Mode Button / Name Function Start or stop recording / backup.  DVR Switch to DVR mode  PTZ Switch to PTZ mode  REW Backward search through a time-shifted or recorded video. ...
  • Page 14 4/8/16CH Triplex DVR ＋ ZOOM IN 1,2,----16 (Channels) Channels Selector (CH1~CH16 depends on each DVR) PTZ Mode Button / Name Function N/A.  DVR Switch to DVR mode  PTZ Switch to PTZ mode  REW Move Left.  STOP N/A.

  • Page 15: I N S T A L A T I O N

    4/8/16CH Triplex DVR Be sure there is no power connection before starting installation! 1. Install the disk drives There are two spaces for disk drives installation on the DVR: One front accessible R/W CD-ROM/DVD-ROM (or removable HDD drive) and one internal 3.5” hard drives with IDE (default) or SATA interface.
  • Page 16 4/8/16CH Triplex DVR Step2: Fix the hard drive The Slim Model (4/8 CH DVR) Put the HDD into the HDD bracket and fixed two screws on each side. Plug in the HDD cable and power line for using. The removable drive (CD-ROM/DVD-ROM) model (4/8CH DVR) Unscrew two screws HDD bracket near to the front panel.

  • Page 17: Install The Internal Disk Drives (Sata Interface) For 4/8Ch Dvr

    4/8/16CH Triplex DVR 1.3. Install the internal disk drives (SATA interface) for 4/8CH DVR It needs an IDE to SATA Bridge (Optional) to transfer IDE interface into SATA before starting to install the hard disk, Step 1: Place the IDE to SATA Bridge into DVR main unit. Unscrew three screws on DVR’s rear panel.
  • Page 18 4/8/16CH Triplex DVR Step 3: Make sure the jumpers on IDE to SATA bridge (JS2) have been set to P1,2-short and P3,4-short as following Step 4: Unscrew two screws HDD bracket near to the front panel. Slide it forward to rear side to take the HDD bracket and install 3.5” HDD drives on the top Then, Put the chassis’s cover back Digital Video Recorder...

  • Page 19: Install The Internal Disk Drives For 16Ch Dvr

    4/8/16CH Triplex DVR 1.4. Install the internal disk drives for 16CH DVR 16CH DVR provides PATA (IDE) and SATA interface both. Put the HDD into HDD bracket and fix it by screws. Then, install the whole HDD set into DVR. <For two HDD installation>...

  • Page 20: Usb Connector On Rear Panel

    4/8/16CH Triplex DVR 2. USB connector on rear panel USB connector on rear panel is dedicated for USB mouse using. Do not connect to any other USB device except the mouse. 3. Camera connections There are 4/8/16 channels for cameras’ connections named CH1, CH2, CH3 …. CH16. Each camera has two wirings basically: BNC and Power.

  • Page 21: Rs485/Rs232 Selection

    4/8/16CH Triplex DVR 4. RS485/RS232 Selection The DVR provide one com port. It can be selected to RS232 or RS485 by setting the jumper on the main control board. 4.1. 4 CH Triplex DVR Open the top cover as mentioned; there is a main control board with JS1: the jumper setting to select RS485 or RS232 as following figure.

  • Page 22: Ch Triplex Dvr

    4/8/16CH Triplex DVR 4.2. 8 CH Triplex DVR Open the top cover as mentioned; there is a main control board with JS1: the jumper setting to select RS485 or RS232 as following figure. 4.3. 16 CH Triplex DVR Open the top cover as mentioned; there is a main control board with JS3: jumper setting to select RS485 or RS232 as following figure.

  • Page 23: Video Format Selection

    4/8/16CH Triplex DVR 5. Video Format Selection The DVR accepts two video formats: NTSC and PAL. It can be select by setting the jumper on the main control board. 5.1. 4 CH Triplex DVR Open the top cover as mentioned; there is a main control board with JS2: the jumper setting to select NTSC or PAL for video format as following figure.

  • Page 24: Cablings

    4/8/16CH Triplex DVR 6. Cablings Before starting to use, you have to connect all the peripherals like LCD display, cameras … as following figure: 6.1. 4 CH Triplex DVR 6.2. 8 CH Triplex DVR 6.3. 16 CH Triplex DVR Digital Video Recorder...

  • Page 25: Sensor Installation

    4/8/16CH Triplex DVR 7. Sensor Installation The DVR unit can be connected up to 4/8/16 sensor inputs as following figure. Each sensor has two lines: signal and ground in order to sense the sensor’s status. 7.1. 4 CH Triplex DVR 7.2.

  • Page 26: Alarm Installation

    4/8/16CH Triplex DVR 8. Alarm Installation The DVR unit provides one alarm (speaker) signal. Please refer to following figure. 8.1. 4 CH Triplex DVR 8.2. 8 CH Triplex DVR 8.3. 16 CH Triplex DVR Digital Video Recorder...

  • Page 27: S T A R T U P T H E D Vrs R S Y S T E M

    4/8/16CH Triplex DVR After the unit is properly installed, the DVR unit is ready to record and play. Then apply power by turn on the power switch. After the unit is powered on, the unit will check HDD for several seconds, and then the unit will enter into real-time display mode shown as the following screen: Digital Video Recorder...

  • Page 28: Commands

    4/8/16CH Triplex DVR 1. Commands 1.1. Operating Buttons  : Press it to enter the main menu or and exit the menu.  /  ( / ): Up / Down – To move up/down through the list of menu. Also used to select menu options or change the DVR configuration values.

  • Page 29: State Information

    4/8/16CH Triplex DVR 1.3. State Information There are state informations on the upper of the screen to show the system status . : Camera on line. : Camera signal loss : Recoding : Stop Recording : Network acting : Network no connection : USB disk : CD / CDRW : HDD Status...
  • Page 30 4/8/16CH Triplex DVR : : 4 Split View (4ch dvr) : : 9 Split View (8ch dvr) : 16 Split View (16ch DVR) : Auto channel rotation (from 1~4 /1~8 /1~16) : Start recording : Stop recording : Enter Main menu : Play menu(Playback), To play the recorded data.

  • Page 31: Main Menu

    4/8/16CH Triplex DVR 2. Main Menu Press  to enter the “main menu”, it will show the password input inquiry as following. /{/) and ) Please enter six numbers by controls on front panel (by using the buttons (number 1~16) on IR remote. Default password is “123456”., ESC/Discard To escape this menu by only using USB mouse After enter the main menu password, it goes into the main menu for DVR setup...

  • Page 32: Channel Setup

    4/8/16CH Triplex DVR 3. Channel Setup Press  to enter the “Channel setup” as following. (4CH DVR) (8CH DVR) (16CH DVR) 3.1. Channel Number To select or specify the channel for displaying/recording. ” ” (default) (Full screen mode): you can view / record all channels (4 or 8 or 16) on the screen of full-screen.

  • Page 33: Record Channel

    4/8/16CH Triplex DVR 3.3. Record Channel To set the channel been selected at “Channel Number” to be recorded or not. “ON” – recording, “OFF”- No recording. It can be setup each channel separately by choosing the dedicated channel at “Channel Number”. Or to choose ” ”...

  • Page 34: Record Setup

    4/8/16CH Triplex DVR 4. Record Setup Press  to enter the “Record setup” as following. (4/8CH DVR) (16CH DVR) 4.1. Auto Record To setup the recording time period by 0sec(OFF), 10sec, 20sec, 30sec, 40sec, 50sec or 60sec. Auto record will help you to re-start the recording automatically in case of abnormal shut down.

  • Page 35: Record Schedule

    4/8/16CH Triplex DVR (16CH DVR) 4.4.1. Auto Balance To setup all channel recording frame rate and keep each channel’s frame rate in balance, Default is “OFF”. When Trigger mode is ON, the active channel has been detected will occupy all record frame rate if Auto Balance set as “ON”. 4.4.2.
  • Page 36 4/8/16CH Triplex DVR  Channel Number To setup the channel recording schedule. ” ”: All channels will be set at the same recording schedule. “1,2,3,4” or “1,2,3,4,5,6,7,8” or “9,10,11,12,13,14,15,16”: To setup each channel recording schedule.  Recording Mode Select There are five recording modes for selection: None, Time, Motion, Sensor and Motion&Sensor.
  • Page 37 4/8/16CH Triplex DVR Time : Indicates to record by time schedule Sensor : Indicates to record by sensor trigger. It means the unit starts recording as the attached sensors being triggered during this period. Motion : Indicates to record by motion detection. Motion&Sensor : Indicates to record by both motion detection and sensor trigger..

  • Page 38: Detector Setup

    4/8/16CH Triplex DVR To set the specified time for each day at the same configuration by select “” For example, the time frame 23:00-24:00 is set to “Sensor” mode for whole week. To set any time (by hour) for each day, just move to the desired daytime and select after setting the desired recording mode For example, “Motion”...

  • Page 39: Channel Number

    4/8/16CH Triplex DVR 5.1. Channel Number To select or specify the channel for detection. ” ” (default) (Full screen mode): you can detect all channels (4/8/16) on the screen of full-screen “1,2,3,4” or “1,2,3,4,5,6,7,8” or “9,10,11,12,13,14,15,16”: you can detect each channel (4/8/16) be selected on the screen 5.2.
  • Page 40 4/8/16CH Triplex DVR “Sensitive Highest”: The highest sensitive level 5.3.2. Record Time To set the motion’s record time as 5sec, 10sec, 15sec, 20sec, 25sec, 30sec, 45sec, 60sec, 90sec, 120sec, 150sec or 180sec 5.3.3. Alarm Mode “Mute”: No beep whatever detecting. “...

  • Page 41: Sensor Setup

    4/8/16CH Triplex DVR 5.3.7. Motion Area Setup Block one area on screen for each channel as motion detection area. It can be done by mouse or by using (), (),  (), () buttons to move the area. After positioning, press “” and save it 5.4.

  • Page 42: System Setup

    4/8/16CH Triplex DVR “ Alarm-Long”: Beep long by speaker of system when detection is active 5.4.4. Alarm Time To Setup the time period of beep by “Nonstop”(no stop), 5sec, 10sec, 15sec, 20sec, 25sec, 30sec, 35sec, 40sec, 45sec, 50sec, 55sec or 60sec 5.4.5.

  • Page 43: View Setup

    4/8/16CH Triplex DVR 6.2. View Setup To setup the illustration and DVR information will be displayed or not. 6.2.1. Icon Help “ON” - Icon help will be shown, “OFF” –Icon help will not be shown Please refer to 1.5 Icons for more detail information 6.2.2.

  • Page 44: Date/Time Setup

    4/8/16CH Triplex DVR 6.2.3. State Information System status information, it includes record light, network information, hard drive information, date/time information and rotate information. All information can be set separately to be seen or not. Please refer to 1.4 State Information for more details. 6.2.4.
  • Page 45 4/8/16CH Triplex DVR 6.3.1. Date View Mode To display the date/time format on state information by DD/MM/YYYY, MM/DD/YYYY or YYYY/MM/DD. (YYYY-Year, MM-Month, DD-Day) 6.3.2. Time Set To setup the day / time.  /  ( / ): Up / Down – Change the number /(/) : Move left/right to the character that need to change ...

  • Page 46: Button Beep Setup

    4/8/16CH Triplex DVR  Server Active: “Enable”-To set this function available. ” X Disable”- Ignore this function  Server IP: The IP address of NTP server  Interval (Days): Set how many days to synchronize  Synchronize Now: Select it to start Synchronizing the NTP server 6.4.

  • Page 47: Hardware Setup

    4/8/16CH Triplex DVR To setup the time period to exit menu automatically by choose “OFF” (not exit unless pressing “”), 10sec, 20sec, 30sec, 40sec, 50sec or 60sec. 7. Hardware Setup 7.1. Authentication Setup Specify the limits of authority of user and set its own password. “...

  • Page 48: Hard Drive Setup

    4/8/16CH Triplex DVR 7.2. Hard Drive Setup To set up the hard drive information and overwriting function 7.2.1. Overwrite enable “YES”: Enable to overwrite hard drive when capacity is full “X NO”: Not permit to overwrite hard drive when capacity is full. 7.2.2.

  • Page 49: Network Setup

    4/8/16CH Triplex DVR  Standard Record Size: The recorded Capacity / Total hard drive capacity by Mega-byte. Also show up the % of how much capacity has been used.  Standard Event Quantity: The quantity has been record of event / Total quantity for event.
  • Page 50 4/8/16CH Triplex DVR 7.3.6. IP Address Setup The IP address acts as a locator for one IP device to find another and interact with it. There are two kinds IP types: Static IP address and Dynamic IP address (DHCP and PPPoE) for selection. ...
  • Page 51 4/8/16CH Triplex DVR  Default DNS Address: The Domain Name system (DNS) translate hostnames to IP addresses (default setting). If there is no customer DNS address setting or fail, DVR will go for Default DNS Address.  Custom DNS Address: The Domain Name system (DNS) translate hostnames to IP addresses (customer setting).

  • Page 52: Screen Setup

    4/8/16CH Triplex DVR “Service Active”: Enable the Dynamic DNS service. “Provider”: The web site / IP Address of Dynamic DNS provider “Server Name”: To define a name of Dynamic DNS “Account”: The account name of Dynamic DNS “Password”: Password for Dynamic DNS DDNS Service Please refer to ...

  • Page 53: Audio Setup

    4/8/16CH Triplex DVR 7.4.1. Screen Border “ON” : To enable the border, “X OFF”: To disable the screen border. 7.4.2. Video Adjustment Adjust the whole picture to right/left or up/down by press /(/) or  /  ( / ). “ ”...

  • Page 54: Keyboard/Ptz Setup

    4/8/16CH Triplex DVR 7.5.1. Audio Record “ON”: Enable audio recording. “X OFF”: Disable audio recording 7.5.2. Audio Mute “ON”: Switch on the audio function “X OFF”: Switch off the audio function 7.5.3. Input Volume “X OFF”: Turn off the audio input volume “1,2,3,4…….10”: Adjust audio input volume from small to aloud.

  • Page 55: Firmware Update

    4/8/16CH Triplex DVR “Channel Number”: Dedicated the PTZ camera channel “PTZ Protocol”: Select PTZ camera’s protocol as Pelco P, Pelco D, Teleview Pelco P, Teleview Pelco D, Merit LILIN (3B), Merit LILIN (7B), HiSharp, Nicecam and Elitar. “Camera ID”: Setup the ID of PTZ camera (meet camera’s local setting) “Camera Reset”: To reset PTZ camera “Speed Adjustment”: To adjust Pan/Tilt/Auto Pan/ Line Scan Speed.
  • Page 56 4/8/16CH Triplex DVR To update or upgrade the DVR firmware by USB disk.. Plug the USB disk into USB port on DVR front panel Plug the USB disk into USB port on DVR front panel After plug in USB disk, it shows” Read file Information” on the button line If something mistake for USB disk or file, it will show: File not found or Disk Error on the button line.

  • Page 57: Load Default Setting

    4/8/16CH Triplex DVR When DVR is updating the firmware, it shows “Firmware is updating, Please wait” as following figure: After firmware update is completed, it will show: Firmware update is success, System will restart ----“ and restart DVR with the same configuration at previous version firmware does.

  • Page 58: Language Selection

    4/8/16CH Triplex DVR 8. Language Selection Multilingual supports with English, Traditional Chinese, Spanish, Russian, Italian, German, Ukrainian, Hungarian and Turkish. 9. Exit Main Menu To exit menu and save / discard the changes. 9.1. Exit & Save Changes To Exit menu and save all configuration changes. 9.2.
  • Page 59 4/8/16CH Triplex DVR Press “” (or “ ”) button or icon to enter Play menu  HardDrive Select: To select or specify which hard drive’s data will be playback.  Channel Select: To setup or specify which channel’s data will be playback ...
  • Page 60 4/8/16CH Triplex DVR Play: Start to play the recorded data After the data has been played, it will show “” Backup: To backup the recorded data. Please refer to “Backup” section Commands and Recorded Data status:  S/N of Recorded Data: Series Number of recorded data provide by system ...

  • Page 61: D A T A B A C K U P B Y Usb Sb

    4/8/16CH Triplex DVR ”) button to enter the Play menu. Press “” (or “  HardDrive Select: To select or specify which hard drive’s data will be backup Use “(/)” button and move to the dedicated recorded data that you want to ”...

  • Page 62: Backup By Cdrw

    4/8/16CH Triplex DVR You can change the time period of recorded data for backup by setting the “Start Time” and “End Time” and plug in the USB disk. The “Free Capacity”, “Estimate Time”, ”Backup Period” and “Backup Size” will be changed automatically.

  • Page 63: E V E N T S E A R C H

    4/8/16CH Triplex DVR   Press “ ” (or “ ”) button or icon to enter Event search menu  HardDrive Select: To select or specify which hard drive’s event will be search.  Channel Select: To setup or specify which channel’s event will be search. ...

  • Page 64: P T Z

    4/8/16CH Triplex DVR  Press “ ” button or icon to enter Pan/Tile/Zoom Control menu Zoom: This function depends on PTZ camera model, NOT every PTZ camera will show it. Operating Icons: Icon Command Enter PTZ channel menu shown on the right side of screen. (if channel number in Yellow-color, it performs as PTZ camera) ...
  • Page 65 4/8/16CH Triplex DVR Command Preset (1 ~32) (Mouse-Left Button): Call Preset (Mouse-Right Button): Setup Preset Position (Mouse-Right Button 2sec): Clear Preset Position : Auto Pan Start : Auto Pan Stop : Line Scan Start : Line Scan Stop :Set Left Limit (Line Scan) : Set Right Limit (Line Scan) : Auto Iris, : Iris Open...

  • Page 66: P C C O N N E C T I O N T H R O U G H L O C A L A R E A N E T W O R K ( N E T W O R K H U B )

    4/8/16CH Triplex DVR 1. Search Router IP Address Please click “Start” and then “Run” option under Windows. Please enter “CMD” and then “OK” Please enter “ipconfig” on DOS prompt, and then record the Address Number of Default Gateway as shown: It is the Router’s IP Address. ...
  • Page 67 4/8/16CH Triplex DVR The network domain is 192.168.11.xxx， Generally usable IP Address is between 192.168.11.2~192.168.11.253， The suggested IP Address is from 192.168.11.160 to 192.168.11.199. Please search IP Address that is not being used at present. Please enter “ping 192.168.11.188” on DOS prompt (as following figure for reference) If it appears “Request timed out”...

  • Page 68: Ddns Service

    4/8/16CH Triplex DVR  GATEWAY: Enter Router IP Address[192.168.011.001]  NET MASK: 255.255.255.0  PORT: Enter the DVR’s port number [14338 14337] 2. DDNS Service For DVR only can set at static IP address and no support the dynamic IP. If you have to use dynamic IP that it recommend serving as DDNS service.
  • Page 69 4/8/16CH Triplex DVR After you click "Create Account", it shows “Account Created”. Also, DynDNS will create a new account for you and send you an e-mail to the address you provided. It needs to confirm your account within 48 hours after receiving the e-mail or it will automatically delete your account.

  • Page 70: Logged In And Host Service

    4/8/16CH Triplex DVR To confirm the account 2.3. Logged In and Host Service Login by enter the Username and password. Then, go to “My Service” to get a host name Double click “Add New Hostname” as following: Digital Video Recorder...
  • Page 71 4/8/16CH Triplex DVR Specify the Hostname for DDNS IP which will be applied to the DVR’s DDNS setting. We take DVR-HOST.dyndns.biz as an example, and click “Create Host” Now, the DDNS service is completed. Well keep the User name, Password and Hostname Digital Video Recorder...

  • Page 72: Router Setting

    4/8/16CH Triplex DVR 2.4. Router Setting Most of the setting of router is identical, here is the suggestion:  Specify DDNS service provider: DnyDNS.org (dynamic)  Specify DDNS IP by DDNS account (user name / password )  Specify DVR IP as private IP setting ...

  • Page 73: P C C L I E N T & P C Cv I E W E R

    4/8/16CH Triplex DVR & & PC Client is applied for remote monitoring, recording, playback, backup and control of 4/8ch video and 1ch audio. Also, you can capture, convert the video from the unit into AVI file or JPEG file, or play the stored video later on. PC Viewer is developed for viewing recorded video, taking snapshot and converting video to AVI format on PC which supports Windows2000/Windows XP/VISTA 1.

  • Page 74: Pc Client/Pc Viewer Program Installation

    4/8/16CH Triplex DVR 2. PC Client/PC Viewer Program Installation After DirectX has been installed, place the CD into PC to start the PC Viewer installation. You will see a table list as following to choose 4/8/16CH DVR at “PC Client/PC Viewer Setup” for installation. 3.

  • Page 75: Pc Viewer Operating Guide

    4/8/16CH Triplex DVR Step 2: At Advanced Properties, enable “Run as administrator”, Then, press OK to complete PC Client properties setting. 4. PC Viewer Operating Guide By press “Player” to act the operating at PC Viewer operating environment. Digital Video Recorder...

  • Page 76: Pc Viewer Operating Buttons & Operating Mode

    4/8/16CH Triplex DVR 4.1. PC Viewer Operating buttons & Operating mode Name Function  Open file. To retrieve the desired video data. Open  Fast Backward Press to play backward faster.  Reverse Press to playback backward  I Previous frame Button for one single frame backward I I Pause Pause the video playback...

  • Page 77: Playback

    4/8/16CH Triplex DVR To display 4/8/16channels on screen(16ch DVR) Mode (16ch) To display 4/8channels on screen(8ch DVR) Mode (8ch) To display 4channels on screen(4ch DVR) Mode (4ch) Speaker Set Speaker On / OFF. Speaker Volume To adjust the speaker’s volume Video Video Play.
  • Page 78 4/8/16CH Triplex DVR After local recording, you can simple to playback the recorded file by using “Open File” function as following. The default path of local recording is C:\Capture. Or you can change the path under hierarchical menu: “Option” Mouse Remote Control: To enable/discard the mouse operating on DVR when you use mouse operation at Client site.

  • Page 79: Capture

    4/8/16CH Triplex DVR Press the right button of mouse, and then choose “Open Disk” to select the USB disk. Then, press “OK” to start playback the data in USB (Removable Disk) 4.3. Capture When you want to capture a period of recorded file, please use “Capture” function. At first, choose the file by using “Open File”, and it will play automatically.

  • Page 80: Connect Pc Client To Dvr

    4/8/16CH Triplex DVR The operating picture will change as following. 5.1. Connect PC Client to DVR Press “Client” on the top and press left button of mouse, it shows a function table. Or simply press the “” button on the control bar beneath. Select “Connect”...

  • Page 81: Status Information

    4/8/16CH Triplex DVR IP Address / Port: The DVR IP address/Port is the IP address of the remote DVR that you can connect by static IP address or dynamic IP. Password: The password is the same password that be used for formatting the DVR Hard Drive.
  • Page 82 4/8/16CH Triplex DVR Name Function /  Connect/Disconnect the network within PC and DVR Channel Mode: To display 4 split screen Channel Mode: To display 9 split screen Channel Mode: To display 16 split screen Channel 1display at full screen (4ch DVR) To display Channel1, channel2…..

  • Page 83: Name Server

    4/8/16CH Triplex DVR ch13~ch16) display at full screen (16ch DVR) Channel 4 display at full screen (4ch DVR) 4 split view the Channel5 ~ channel8 (8ch DVR) 9 split view (ch1~ch8 / ch9~ch16) display at full screen for 16ch DVR To display Channel9, channel10…..

  • Page 84: Pc Capturing

    4/8/16CH Triplex DVR It can be switched to PC Client mode for remote motoring just choose the idea DVR by double click. 7. PC Capturing Before use PC Capturing, please make sure K-Lite Codec Pack has already existed. You can refer to http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm or Insert the CD that DVR to choose “Download K_lite_codec”...
  • Page 85 4/8/16CH Triplex DVR Press “AVI” on the top to capture video that is synchronous with DVR and save as a file on PC. Before PC starting to capture video from DVR, it asks will it lower down the internet speed. Also, you can setup the directory for file saving.

  • Page 86: Playback

    4/8/16CH Triplex DVR Press “AVI” again for stop/completing the video capture and save file. And icon “AVI” will back to normal. 8. Playback To operate the Playback function by playback control buttons at the bottom of the screen. I I Pause Pause the video playback ...

  • Page 87: R E M O T E S U R V E I L A N C E T H R O U G H I E B R O W S E R

    4/8/16CH Triplex DVR You can remote control the DVR unit through IE Browser Before starting to IE Browser, please make sure Active-X has already existed. You can install Active-X from CD as attached. Or start up IE Explorer with dedicated DVR IP address to URL, please refer to 7.3.6 IP Address Setup.
  • Page 88 4/8/16CH Triplex DVR The following is an example for setting: DVR IP address: 192.168.11.138 <IE Explorer / Web site> Enter the “Port: 8841”, and “Password: xxxxxx” Then, click “Connect” There are some error messages will be shown as operating notice. All the operating can be done by mouse and buttons, Menu Control Name...
  • Page 89 4/8/16CH Triplex DVR MENU Enter menu or exit. Moves right / Channel change ＋ Moves left / Channel change － ▲(UP)/ ▼(DOWN)/ Moves up/down/left/right through the list of menus. Or use it to  (LEFT)/ ►(RIGHT) select / change the DVR configuration values. Select Use this button to change or confirm values on main menu or sub menu setting.

  • Page 90: S E C U V I E W E R

    4/8/16CH Triplex DVR Iris Open Tap the button to make a selection. Iris Close Tap the button to cancel a selection. Auto Focus Set as Auto Focus Focus Near Tap the button to focus near. Focus Far Tap the button to focus far. Zoom In Tap the button to zoom near Zoom Out...

  • Page 91: Dvr Connect

    4/8/16CH Triplex DVR DVR Connect Press it to start connecting the DVR and mobile phone. Note 1: Some models of mobile phone will show a warning “Allow application to send to the Internet? “ Please enter “YES”. Note 2: The connection fee depends on your ISP or system provider, please check it before use.
  • Page 92 4/8/16CH Triplex DVR When the keypad is locked, it shows the icon: . Screen Rotate: Rotate the canvas 90deg clockwise for a larger viewing size. Or use hotkey "#" to rotate screen Disconnect: To disconnect the mobile phone and DVR. DVR Info: DVR information includes DVR model, Firmware version, video type …..
  • Page 93 4/8/16CH Triplex DVR 『Key』- The mobile is operated by stylus, there are buttons for DVR remote control Operating keys: Number 0 - 9 : can be the number only or channel selection 『＊』: Main menu As connect to 4CH DVR : 1-4 =>...

  • Page 94: Login Setup

    4/8/16CH Triplex DVR As connect to 16CH DVR : 1-16 => Switch Channel 41 => 4-Split Screen 1 42 => 4-Split Screen 2 43 => 4-Split Screen 3 44 => 4-Split Screen 4 81 91 => 9-Split Screen 1 82 92 => 9-Split Screen 2 99 =>...

  • Page 95: Exit

    4/8/16CH Triplex DVR Exit Press it and exit SecuViewer operation. Digital Video Recorder...

This manual is also suitable for:

8ch triplex16ch triplex

Table of Contents