Miele Incognito G 818 SCVi Operating Instructions Manual page 16

^ Press the f button.
The f indicator will light.
An indicator corresponding to a preset
water hardness will light (see Table 2).
15 - 16 270 - 280
17 - 21 300 - 370
22 - 24 390 - 430
25 - 31 450 - 560
32 - 70 570 - 1260
If this value corresponds with the water
hardness in your area:
^ Turn off the dishwasher.
If you need to program a different water
hardness:
^ Press the button which corresponds
to your water hardness (see Table 2).
The "Salt" and b indicators will flash.
^ Press the f button twice.
The "Salt" and f indicators will flash.
The new water hardness is set.
^ Turn off the dishwasher.
16
^ Open the door.
^ Turn off the dishwasher.
^ Press and hold the a and c buttons.
At the same time turn on the dish-
washer with the "On" (15) button.
^ Release all buttons.
a
The "Salt" and b indicators will flash.
b
If this is not the case, the above steps
c
must be repeated.
d
^ Press the b button.
e
The b indicator will go out and the
"Salt" indicator will flash.
The programmed water hardness is in-
dicated by:
Corresponding indicator is lit, (see
Table 1).
^ If an indicator is not lit, press the f
button.
The f indicator and an additional cor-
responding indicator is lit (see Table 2).
^ Turn off the dishwasher.