Index; Specifi Cations; Licence - Panasonic Viera TH-37PD60B Operating Instructions Manual

On screen messages
Problem
On screen messages
All tuning data will be erased
Are you sure ?
Are you sure you want to delete this timer ?
Press OK to delete timer
Press Exit to return
Bad Signal
DOWNLOAD IN PROGRESS PLEASE WAIT
DVB Tuner Locked
This programme is locked for recording
Feature not available
Incorrect PIN Number
Invalid DVB Channel
Invalid system time. Please exit !
Max number of Timer already set !
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to Ignore.
Warning! Selecting Auto Setup will delete
current Profi le and Childlock settings
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to Ignore
No DVB Service found
No module inserted
No recording -Check Tape or Disc
No recording - UNKNOWN REASON
No Service
No Signal
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
Please check settings and connections on HDMI devices.
No stations found
Please insert the aerial
Please wait.
Recording in progress
Recording stopped - TV source changed
Software successfully updated
Press EXIT to continue
Software Update failed. Please try again later.
Press EXIT to continue
This service is locked!
Press OK to enter PIN
Timer already expired !
Timer Event Due to Start
1: BBC1 has been
Programmed for recording at 20:00
Timer incorrect !
Timer overlap!
Unable to download, Check Equipment
WARNING
All analogue tuning data will be erased
WARNING
46
All digital tuning data will be erased
Actions
Actions / Meanings
•
"Shipping condition" will erase all tuning data.
•
Make sure the operation is with your desire.
•
Make sure the deleting programme event is with your desire.
•
The signal is weak. Check the aerial.
•
Q-Link channel download is in progress.
•
If you want to unlock, cancel Direct TV Recording (p. 36) or
Timer Programming (p. 34).
•
• Check the Q-Link connection and setting (p. 36).
The impossible source (Component / HDMI) to be record.
•
The PIN number you entered is wrong.
•
Invalid DVB channel is selected.
•
Cannot get the time information. Check the connection of the RF cable.
•
Maximum timer programming event is 8.
•
There is a new DVB station.
•
There is a new software available.
•
No DVB signal can be found in Auto Setup.
•
Check the CI module inserted completely (p. 25).
•
The tape or disc may be "write protected", missing or damaged.
The equipment may already be recording.
•
• The recording cannot be done by any reason. Check the equipment.
Disc or tape may be full.
•
The station stops the services.
•
Check the connection of the RF cable.
•
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
•
Communication error in Control with HDMI function (p. 38).
•
No analogue signal can be found in Auto setup.
•
A function is in progress.
•
The recording equipment is recording the programme signal from
its own tuner. You can turn the TV off and leave the equipment
recording in the normal way.
•
Direct TV recording (analogue mode) will stop if channel or input
source is changed.
•
The software updating is fi nished.
•
Perform "System Update Search Now" in System Update (p. 25).
If it is still failed, there may not be the new software.
•
The selected channel is locked in Child Lock (p. 27).
•
Starting time in Timer Programming is already past. Set correctly (p. 35).
•
This message will appear 2 minutes before timer programming
event due to start.
•
Set Starting and Ending times in Timer Programming correctly (p. 35).
•
The timer programme events are overlapped. Cannot record
other channel at the same time. Check the Starting and Ending
times in Timer Programming (p. 35).
•
The tape or disc is active. Stop the equipment and try again.
•
Auto setup will be erased all present analogue tuning data
(p. 31).
•
DVB Auto Setup will be erased all present DVB tuning data
(p. 28).

Index

A
Accessories ············ 6 DVDs ···················· 17
Add New Service ·· 28
E
External equipment
Ambience ············· 21
························ 8, 40
Aspect ············ 11, 42
External input ·····17, 29
Auto Setup ··· 10, 28, 31
F
AV2/AV3 out ··· 23, 36 FAQs················44-45
C
H
Category list ········· 12
HDMI ···············37-39
Child Lock ············· 27
Hold ················ 11, 16
CI module ············· 25 Home theatre ········ 38
Clamper ·············· 6, 9
I
Information banner ···· 11
Component ··········· 43
Input signal ··········· 43
Connection ········· 8, 40
L
Control with HDMI ·· 38, 40
Licence ················· 48
Lock ······················ 31
D
Direct TV Recording ···36
Display Timeout ·····25 M
Mains Lead ········· 6, 8
Download to equipment
Maintenance ··········· 5
··················· 10, 31
Manual tuning ··· 30, 31
DVB Auto Setup ··· 28
Menu Functions ···18-23
DVB LED ·········· 7, 13
N
New Service Message ·· 28
DVB settings ········· 24
NICAM ·················· 21
DVB Tuning Menu ··· 28
Normalise ········· 7, 20
DVI························ 37
Specifi cations
TH-37PD60B
Source / Average AC 220-240 V, 50 / 60 Hz / 215 W
Standby condition 0.3 W (Without DVB recording) / 20 W (With DVB recording)
Drive method AC type
Ratio 16:9 (Aspect Ratio) / Max 10000:1 (Contrast Ratio)
94 cmV
Visible screen size 818 mm (W) × 461 mm (H) ×
(No. of pixels) 939 mm (diagonal)
408,960 (852 (W) × 480 (H)) [2,556 × 480 dots]
12 cm × 6 cm × 2 pcs, 8 Ω / 20 W (10 W + 10 W)
Speaker / Output
PAL I : UHF E21-68.
PAL 525/60 : Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC
Receiving Systems / disc playback from DVD player and recorder.
Band name DVB : Digital terrestrial services via UHF aerial input.
M.NTSC : Playback from M.NTSC Video recorders (VCR).
NTSC (AV input only) : Playback from NTSC Video recorders (VCR).
Aerial - Rear UHF
Operating Conditions Temperature : 0 °C - 40 °C
AV1 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in)
AV2 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, S-Video in, Q-Link)
AV3 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)
COMPONENT Y 1.0 V[p-p] (including synchronization)
Others HDMI TYPE A Connector
AUDIO L - R RCA PIN Type × 2
Output AUDIO L - R RCA PIN Type × 2
Dimensions ( W × H × D ) 968 mm × 641 mm × 97 mm
Weight
25.0 k Net
•
Design and Specifi cations are subject to change without notice. Weight and Dimensions shown are
Note
• approximate.
This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020.
NTSC ·············· 18, 47 Signal Condition ··· 28
Specifi cations ······· 47
O
Off timer ················ 23
Subtitles ·········· 11, 16
On / Off switch ·· 7, 11
S-video ··················· 8
Optional accessories ·· 6
System Update ·· 25, 42
Owner ID ········ 10, 33
T
Teletext ············14-16
P
PAL ······················· 47
Timer programming ·· 13, 34
PIN number ··10, 27, 33
TV Guide ········ 12, 13
P-NR ····················· 21
TV speaker ··········· 39
Power LED ······· 7, 10
Type list ················ 12
Profi le Edit ············ 27
U
Programme edit ········· 31 Update the software ··25, 42
Q V
Q-Link ··················· 36 Videos ··············· 8, 17
Quick Start Guide ··6-10 Viewing mode ······· 21
R W
Remote control ··· 6, 7 WSS ····················· 42
RGB ························ 8
Z Zoom ·············· 11, 42
S
Sales and Support Information
························· 48
Satellite receiver ·9, 17, 40
SCART ············· 8, 43
Shipping condition ·······32
TH-42PD60B
AC 220-240 V, 50 / 60 Hz / 247 W
106 cmV
920 mm (W) × 518 mm (H) ×
1,056 mm (diagonal)
Humidity : 20 % - 80 % RH (non-condensing)
P , P ±0.35 V[p-p]
B R
0.5 V[rms]
0.5 V[rms] (high impedance)
1,068 mm × 701 mm × 97 mm
29.0 k Net
47