Table of Contents
Advertisement
1.8.2 Using the manual input tray
You can print not only on plain paper but also on
special media (transparencies / labels /
envelopes).
The manual input tray is used only for printing
with the computer (page 53) and can hold one
page at a time. When printing multiple pages,
add a next page after the first page has been fed
into the unit.
L Please refer to page 94 for information on
recording paper.
Load the recording paper after you have
started printing with the computer.
1
Pull open the manual input tray (1), and
then raise the extender (2) gently until it
clicks into place.
2
Insert the paper, print-side down (1) until
the unit grasps the paper and a single beep
is heard.
L Adjust the width of the guides (2) to the
Note:
L If the paper is not inserted correctly, re-adjust
the paper, or the paper may jam.
L Make sure the unit grasps the recording
paper as specified in step 2. The display
shows the following.
PAPER IN TRAY #2
FOR PC PRINTING
1
1.9 Handset unit
1
Connect the handset cord (1) to the
handset and the handset cradle.
2
1. Introduction and Installation
size of the recording paper.
1
2
1
21
Advertisement
Table of Contents
