Panasonic Viera TX-L32C3B Operating Instructions Manual page 29

Menu Item
Mode
Bass
Treble
Equaliser
Balance
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Speaker Distance to Wall
Preferred Multi Audio
NICAM
SPDIF Selection
PCM Optical Level
HDMI1 / 2 Input
Adjustments / Configurations (alternatives)
Selects the basic sound mode [Music] / [Speech] / [User]
The selected mode affects all input signals.
[Music] : Improves sound quality for watching music videos, etc.
[Speech] : Improves sound quality for watching news, drama, etc.
In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and those
settings will be stored for each mode.
[User] : Adjusts the sounds manually by using the equaliser to suit your favourite
sound quality.
For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] and
[Treble]. Select the [Equaliser] and adjust the frequency.
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts the frequency level to suit your favourite sound quality
This function is available when [Mode] is set to [User].
Select the frequency and change the frequency level by using the cursor button.
If you want to enhance the bass sound, raise the level of the lower frequency. If you
want to enhance the treble sound, raise the level of the higher frequency.
To reset the levels of each frequency to the default settings, select the [Reset to
Defaults] by using the cursor button, and then press the OK button.
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings [Off] / [V-Audio]
[V-Audio] : Provides a dynamic enhancer of width to simulate improved spatial effects
Adjusts the current volume level if it is extremely different from the previous viewed
channel or input mode [Off] / [On]
Adjusts the volume of individual channel or input mode
Adjusts the low frequency sound [Over 30cm] / [Up to 30cm]
If the gap between the TV and wall is over 30 cm, [Over 30cm] is recommended.
If the gap between the TV and wall is within 30 cm, [Up to 30cm] is recommended.
Selects the preferred language for digital channel multi audio (depending on the
broadcaster) [English] / [Welsh] / [Gaelic] / [Irish]
Near Instantaneous Companded Audio Multiplex
Reproduces NICAM stereo sound [On] / [Off]
Off if reception is poor (FM monaural sound)
Analogue mode only
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and
HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto] : Dolby Digital Plus and Dolby Digital are output as Dolby Digital Bitstream.
HE-AAC (48 kHz) multi-channel is output as DTS.
MPEG is output as PCM.
[PCM] : Digital output signal is fixed to PCM.
For DVB mode or Video mode of Media Player (p. 55)
ARC (Audio Return Channel) : A function of digital audio output using HDMI cable
Adjusts the audio level of PCM output from DIGITAL AUDIO OUT terminal as the initial
setting [-12] / [-10] / [-8] / [-6] / [-4] / [-2] / [0] (dB)
Normally, PCM sound is larger comparing with the other types of audio track.
DVB mode only
Select to fit the input signal [Digital] / [Analogue] (p. 70)
[Digital] : When sound is carried via the HDMI cable connection
[Analogue] : When sound is not carried via the HDMI cable connection
HDMI input mode only
[Equaliser] (see below)
29