Advertisement
Advertisement
Table of Contents
Related Manuals for TSC In wall
Summary of Contents for TSC In wall
- Page 1 USER’S ManUaL in waLL in cEiLing SpEakERS...
-
Page 2: Center Channel Speakers
Again, thank you. OUt Of thE BOx You should save the carton and the inserts your speakers came in. You may need to ship your TSC speakers in the future and the packaging is designed to protect them from damage. -
Page 3: Surround Speakers
• You can either “punch through” the drywall material with the saw or drill a small hole at one corner of the You have the option of using In-ceiling speakers for surround channels also. We’ll cover placement cutout to place the blade accurately. issues for them shortly. 3) When you’ve finished, remove the cut-out rectangle. 4) With lengths of 1” wide masking tape, seal the exposed edges of the drywall material so that the tape overlaps the front and rear sides of the hole you’ve just made. Masking Tape In Wall / In Ceiling: PAGE 3... -
Page 4: Connecting Your Speakers
And, of course, turn your system back ON when you’re done! TSC In-Wall and In-Ceiling speakers have two spring-loaded terminals for connecting the speaker wire from your amplifier. (Note: The SC-6DT is a one piece stereo speaker with two sets of connection terminals. -
Page 5: Final Installation
Your TSC In-Wall and In-Ceiling speakers don’t need much maintenance. Wipe them occasionally with a damp cloth to keep the frame and grille clean. Above all, enjoy! That’s what your TSC speakers were designed for and why we take such pride in bringing them to you! To install the speakers: 1) Take off the protective grille by gently prying up a corner with a sharp knife blade, awl, or other pointed tool.
Need help?
Do you have a question about the In wall and is the answer not in the manual?
Questions and answers