Table of Contents
Advertisement
On screen messages
Message
Found new software version ***.
Press OK to start update
(may take 40 mins)
or Press EXIT to ignore.
and you can update when TV is in standby.
Invalid operation - Please check settings
and connections.
Invalid system time. Please exit !
Max. number of Timers already set !
New channels found!
Press OK to update Channel List
Press EXIT to ignore.
No channel found.
Please check aerial or local channel
availability.
Press OK to start Auto Setup.
No module inserted
No recording - Check media
No recording - Already recording
No recording - Unknown reason
No service
No signal
PIN incorrect!
Please check settings and connections
on HDMI devices.
Please wait.
Recording this channel now
Reset to Factory Shipping Condition
Completed.
Please switch off TV.
Sending Preset Data
Please wait!
Software successfully updated.
Press EXIT to continue.
Software update failed. Please try again later.
Press EXIT to continue.
68
Meaning / Action
There is a new software available.
Check the Q-Link or VIERA Link connection and setting (p. 50 - 53).
Cannot get the time information. Check the connection of the RF cable.
The maximum number of timer programming events is 15.
There may be new channels available.
This message will appear each time a change is made by the
broadcasters. This message can be deactivated by setting "New Channel
Message" to Off in "DVB Tuning Menu".
Selecting OK will be performed "Update Channel List".
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
Check the CI module inserted completely (p. 43).
The tape or disc may be "write protected", missing or damaged.
The equipment may already be recording.
The recording may not be performed. Check the equipment.
Disc or tape may be full.
The broadcaster has stopped the service. Check the channel in the TV
Guide. (p. 18 and p. 19)
The TV cannot detect the signal. Check the connection of the RF cable.
The PIN number you entered is wrong.
Communication error in VIERA Link function (p. 53).
A function is in progress.
The recorder is recording the programme from its own tuner. You can turn
the TV off and leave the equipment recording in the normal way.
"Auto Setup" will automatically start when Mains power On / Off switch is
next turned On. (p. 12)
Q-Link or VIERA Link channel download is in progress.
The software updating is finished.
Perform "System Update Search Now" in System Update (p. 42).
If this is still unsuccessful, there may not be any new software available.
Hide quick links:
Advertisement
Table of Contents
