Table of Contents
Advertisement
You can determine which type of local BT exchange you are connected to using
the following procedure.
1. Ensure that the dialling mode is set to TONE.
2. Press
(Talk), then identify the dial tone.
3. Dial a number you are familiar with.
4. If the call is successful, you are connected to a tone exchange. Therefore,
leave the dialling mode as TONE.
5. If the call is not successful, you are connected to a pulse exchange.
Therefore, set the dialling mode to PULSE.
Installing the Handset Clip
If necessary, you can attach the handset clip so you can hang the handset on
your belt or pocket.
To remove the handset clip
19
Advertisement
Table of Contents
