Panasonic Viera TH-42PZ81B Operating Instructions Manual page 65

Message
Other Satellite Service list is full
PIN incorrect !
Please check settings and connections
on HDMI devices.
Please choose a frequency between
9750 and 12750 MHz
Please wait.
Recording this service now
Sending Preset Data Please wait !
Shipping condition completed.
TV can now be switched off.
Software successfully updated
Press EXIT to continue
Software Update failed. Please try again later.
Press EXIT to continue
Timer already expired !
Timer Event Due to Start
DVB 1: BBC1 has been
Programmed for recording at 20:00
Timer incorrect !
Tuner Locked
Please stop recording to operate
Unable to acquire IP address
Unable to download, Check Equipment
■
SD Card
Cannot read fi le
Confi rm SD card
Is SD Card in?
No valid fi le to play
Over 9999 pictures found
This operation is not possible
Meaning / Action
•
No more Other Satellite services can be added.
•
The PIN number you entered is wrong.
•
Communication error in VIERA Link function (p. 52).
•
The frequency you entered is out of range. Please consult the received
satellite broadcasting company.
•
A function is in progress.
•
The recorder is recording the programme signal from its own tuner. You
can turn the TV off and leave the equipment recording in the normal way.
•
Q-Link or VIERA Link programme download is in progress.
•
"Auto Setup" will automatically start when Mains power On / Off switch is
next turned On. (p. 12)
•
The software updating is fi nished.
•
Perform "System Update Search Now" in System Update (p. 37).
If this is still unsuccessful, there may not be any new software available.
•
Starting time in Timer Programming is already past. Set correctly (p. 47).
•
This message will appear 2 minutes before timer programming event due
to start.
•
Set Start and End times in Timer Programming correctly (p. 47).
•
If you want to unlock, cancel Direct TV Recording (p. 51 and p. 53) or
Timer Programming (p. 46).
•
Unable to obtain the IP address. Check the settings and connections of
the router.
•
The tape or disc is active. Stop the equipment and try again.
•
The fi le is broken or unreadable.
•
The TV does not support the format.
(For the applicable formats and data, see p. 59.)
•
The inserted SD card has a problem.
•
Confi rm SD Card is inserted correctly.
•
The card has no data.
•
Maximum valid number of photos is 9,999.
•
Your operation is not available.
65