Driver Installation Steps - LEI Extras USB MMC/SD Card Reader Installation Instructions Manual

1. Turn off all other applications. (You must disable any virus scanning
software before beginning the installation. You can turn the virus
scanning program back on after driver installation is complete. To do
this, refer to the virus scan software's instruction manual.)
2. Insert the CD-ROM containing the drivers into your CD drive. (If you
purchased the card reader along with MapCreate 6, insert any Map-
Create disc.) Follow the on-screen instructions. If, however, the instal-
lation doesn't start on its own, follow steps 2A and 2B. Otherwise, go to
step 3.
2A. Click | .
S R
TART UN
2B. Depending on your reader version (1 or 2) and where D: is the
drive letter for your CD-ROM, type:
(for USB1)
D:\USB_MMC_Reader\Setup.exe
or
for USB2)
D:\USB2_MMC_Reader\Setup.exe (
3. Click to begin installation.
OK
4. Follow the on-screen instructions.
5. When the installation program is finished, follow the instructions
and restart.
6. After Windows restarts, you can transfer files to and from your MMC
card or SD card. You can also format your cards. Windows will display
your MMC reader as a removable disk drive.
MMC card reader appears as removable disk drive (H:).
7. Remember to restart any virus scan software you may have disabled
after the computer reboots and the card reader has been installed.
2