Page 1
Email: midas.info@uk.telex.com Website: www.midasconsoles.com MIDAS Verona Power Supply Operators Manual DOC02-V190 Issue 1.0 - February 2004 (c) Telex Communications (UK) Ltd. In line with the company’s policy of continual improvement, specifications and function may be subject to change without notice. This Operators Manual was correct at the time of writing. E&OE.
Page 3
Important Safety Instructions Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR These symbols are internationally accepted symbols that warn of potential hazards with electrical products.
Klark Teknik Building, Walter Nash Road, Kidderminster, Worcestershire, DY11 7HJ. Declare that a sample of the following product:- Product Type Number Product Description Nominal Voltage (s) Current Freq V190 External Linear 100V AC, 120V AC 4.3A, 3.7A 50/60Hz Power Supply 220V AC, 240V AC 2.1A, 1.95A...
Page 7
The V190 external power supply has been developed to be used soley with the Midas Verona Series of audio mixing consoles. All backed up by the standard Midas Three Year Warranty. Please take the time to complete and return the registration card and, to obtain the best results with a minimum of effort, also read this operators manual.
Page 8
Installation and Service Installation and Service The V190 series power supply unit is a two unit nineteen inch (2U 19”) rack mounted power supply for use with the Midas Verona series of consoles only. Installation Before installing the power supply, please ensure that the correct mains supply voltage is selected on the rear of the supply.
Page 9
Connection and Operation Connection and Operation Connection Before powering up the V190 power supply, connect either the front or rear power supply output to the power inlet socket on the console. The V190 power supply provides: PUSH Pin 1 -...
Servicing and Maintenance Both the Verona and the Midas V190 linear external power supply both contain potentially lethal voltages and should only be serviced by authorised Midas service agents. In the event of malfunction, please refer servicing to qualified personnel.
Need help?
Do you have a question about the V190 and is the answer not in the manual?
Questions and answers