Troubleshooting - Panasonic NV-FJ614 Operating Instructions Manual

Adjusting the Playback picture
If the picture is distorted with
noise bars, press the
TRACKING / V-LOCK Button
in the (+) or (-) direction during
Playback, Still Playback
or Slow Playback.
For automatic adjustment,
press (+) and (-) at the same time.
Note:
The tracking cannot be adjusted on certain cassettes.
This is not a functional fault of the VCR.
14

Troubleshooting

Noise bars on the TV picture
The meaning of some On Screen Displays
Please use tape with unbroken recording tab !
The REC Button or REC/OTR Button was pressed to record,
but the cassette's erasure prevention tab has been broken off.
In order to record, use a video cassette with an intact erasure
prevention tab (see page 6).
This action is not possible before time and date are set
The PROG./CHECK Button or SV/V+ Button was pressed without
a date and time being set on the VCR.
Set the date and time (see page 8).
No timer programmes to be done !
The TIMER Button was pressed, but no timer recording was programmed.
Programme a timer recording (see pages 6-7, 13).
Please put VCR into stop mode first
An attempt was made to change the programmed data while a timer recording
was still in progress.
You must stop the recording first by pressing the TIMER Button
before you can change the programming.
VQT9002