Auto Power Standby Function - Panasonic Viera TX-L32U2B Operating Instructions Manual

TV
SD Card slot
(p. 48)
CI Slot
(p. 46)
Headphones
jack (p. 60)
Remote control signal receiver
•
Do not place any objects between the TV remote control signal receiver and remote control.

Auto power standby function

The TV will automatically go to Standby mode in the following conditions:
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• "Off Timer" is active in the Setup Menu (p. 17)
• no operation is performed for the period selected in "Auto Standby" (p. 30)
This function does not affect Ext Rec. of Timer Programming and Direct TV Recording.
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
How to use remote control
MENU
Open the main menu
Move the cursor / select the menu item
Access the menu / store settings after adjustments
have been made or options have been set
ON SCREEN HELP Instructions box - Operation guide
(example: Owner ID)
Owner ID
Please enter new PIN
PIN * * * *
EXIT
PIN entry
0 9
RETURN
Power and Timer LED
Red : Standby
Green: On
Orange: Timer Programming On
Orange (flash): Ext Rec. of Timer Programming or Direct TV Recording in progress
Red with orange flash: Standby with Timer Programming On or Direct TV Recording
The LED blinks when the TV receives a command from the remote control.
C.A.T.S. (Contrast Automatic Tracking System) sensor
•
Senses brightness to adjust picture quality when "C.A.T.S." in the Picture Menu is set
to "On" (p. 28).
Operation guide will help you.
Function select
Volume / Contrast / Brightness / Colour / Sharpness /
Tint (NTSC signal) / Bass ("Music" or "Speech" mode in the
Sound Menu) / Treble ("Music" or "Speech" mode in the
Sound Menu) / Balance / Auto Setup (p. 34 and p. 35)
Increases or decreases the channel position by one.
When a function is already displayed, press to increase
or decrease the selected function. When in Standby
mode, switches TV On (Press for about 1 second).
Changes the input mode
Mains power On / Off switch
•
Switch On to turn on the TV or turn
the TV to standby mode by the remote control
EXIT
Exit the menu system and return to
the normal viewing screen
Move the cursor / adjust levels /
select from a range of options
RETURN
Return to the previous menu
9