NAiS EP-1060 Instruction Manual page 7

Example 2 Changing to a massage type outside the category.
(Changing to Tap B when Knead is selected.)
• When Knead is combined with Tap B, deselecting Knead will leave only Tap.
manual operation manual operation
shiatsu swedish knead shiatsu swedish
vibration tap A tap B vibration tap A
Press
whole back regional whole back
roll roll
4. Adjusting Manual Massage Settings
Adjusting the Vertical Position of the Massage Heads
• The massage heads will move a little each time the button is
pressed. If you hold down the button, the massage heads will
continue to move until you release the button. When the
massage heads reach their limit you will hear a "peep, peep,
peep" sound.
Adjusting the Width between Massage Heads
• Vibration, Tap, Shiatsu Whole Back Roll, and Regional Roll
can be adjusted in 5-stages while Swedish can be adjusted in
3-stages.
• As Swedish covers the entire width of the back, it is not
possible to adjust width settings.
• The massage heads will move a little each time the button is
pressed. If you hold down the button, the massage heads will
continue to move until you release the button.
• When the massage heads reach their limit you will hear a
"peep, peep, peep" sound.
Adjusting Massage Intensity
• Massage intensity can be adjusted in 3 stages.
• When the massage heads reach their limit you will hear a
"peep, peep, peep" sound.
• As Roll or combining Roll with other massages sometimes
produces an especially strong massage, adjustment is limited
to medium or weak.
Roll, Roll + (Shiatsu, Tap B, Tap A, Vibration) Combination..................................Weak/Medium
Roll + (Knead, Swedish Combination) ...................................................................Weak
• For Tap B, Swedish, and Vibration, unless the massage heads are actually touching the body, you may not
feel the movement.
5. Auto Stop in Manual Operation
• A timer will automatically stop the unit approximately 15 minutes (15–17 minutes) after the massage started.
(This is to prevent overuse in the interests of safety.)
• The massage heads will move to the retracted position and stop.
• The ON/OFF lamp will flash until the heads have stopped moving.
• If you want to start another massage, please press the
• Please wait at least 10 minutes between massages to allow your body to rest.
6. Stopping Manual Operation
Press the button to stop manual operation.
• The ON/OFF lamp will continue to flash until the massage heads have returned to the retracted position.
42
manual operation
knead shiatsu swedish knead
Press
tap B vibration tap A tap B
regional whole back regional
roll
Raising the massage heads Lowering the massage heads
position
Press
Increasing the width Decreasing the width
position
Press
Increasing massage intensity Decreasing massage intensity
intensity
Press
button.
LEG MASSAGE IN MANUAL OPERATION
• It is possible to carry out leg massage at the same time as upper body massage.
• If your calves are not in the correct position in the legrest, please adjust your legs so that they are.
1. Press the
• The programmed operation and leg massage button will flash.
2. Press the Leg Massage button
• The massage will start.
• The intensity of the massage will be displayed.
• It is possible to adjust the reclining angle during the massage.
Air will be released from the legrest while the Reclining Button
is pressed. Adjust the position of your legs during this time.
position
3. Adjusting Massage Intensity
• Leg massage intensity can be adjusted in 2 stages (EP1060).
Press
position
• Leg massage intensity can be adjusted in 2 stages (EP1260).
Press
4. Leg Massage Auto Stop
• A timer will automatically stop the unit approximately 15 minutes (15–17 minutes) after the massage started.
• If you want to start another massage, please press the
intensity
5. STOPPING MANUAL OPERATION
Press the button to stop the leg massage.
Press
• It will take some time before all the air escapes from the leg massage unit.
(Air will continue to escape even after the
Note
Integrated Timer to Prevent Overuse
• An integrated timer prevents overuse of the unit.
• When using manual operation, the timer automatically stops operation after 15 minutes (15–17 minutes).
* If you want to continue to use the unit, please wait at least 10 minutes between massages to allow your
body to rest.
button
gentle
gentle
leg massage
button.
button has been pressed.)
gentle strong gentle strong
leg massage leg massage
Press
Strong Gentle Off
Press Press Press
strong gentle strong gentle strong
leg massage leg massage leg massage
Gentle Strong Off
Press Press Press
strong gentle strong gentle strong
leg massage leg massage
43