Cable Cover Removal And Fitting; How To Open The Front Cover; How To Use The Lcd Stand - Panasonic TX-26LXD1 Operating Instructions Manual

Cable cover removal and fitting

Note:
To avoid interference appearing on the screen, do not bundle the RF cable and mains lead together.

How to open the front cover

Lift up the cover where the mark "
Pull down to close the cover.

How to use the LCD stand

Adjust the LCD panel to your desired angle. The LCD panel can be swiveled up to 40 in the right-and-left direction.
Note:
The LCD panel cannot be tilted forward and backward.
Removal
2
1
Fitting
2
1
1
" is shown.
1. Push down hooks and pull the cover slightly towards
yourself to disengage the claws (at 4 points).
2. Slowly pull out in the downward direction.
1. Insert the claws (at 4 points) at the bottom end.
2. Push until it clicks.
(View from the top)
Front
5