For DVB mode
●
Service Replacement
(On
/ Off)
Set to
On
to display a message to switch to the available service (only
available in some countries).
For DVB-C mode
●
Signal Condition
Checks the signal condition.
Watching
Not valid in Analogue mode
●
Attenuator
(On
/ Off)
Automatically reduces the DVB-C signal to avoid the interference.
If the DVB-C signal is too strong, the interference may occur. In this case,
●
set to
On
to weaken the signal automatically.
Add TV Signal
Adds the TV mode.
This function is available if you skip any modes to tune in
●
first using the TV.
= Note =
The settings in
Tuning Menu
●
The menu name varies depending on the TV mode.
/
DVB-T Tuning Menu
Language
OSD Language
Changes language for on-screen displays.
Preferred Audio 1 / 2
Selects the first and second preferred language for DVB multi audio
(depending on the broadcaster).
Tuning and editing channels
are applicable only for the selected TV mode.
/
Analogue Tuning
- 128 -
Signal Condition
Auto Setup
(DVB-C Tuning Menu
Menu)
for