Power On Link; Power Off Link; Standby Power Save; Intelligent Auto Standby - Panasonic TX-L32E6E User Manual

Power on Link

Set Power on Link On
Settings Setup
When the connected equipment starts playback or direct navigator / function
menu for the equipment is activated, the TV is automatically turned on. (Only
when the TV is in Standby mode.)

Power off Link

Set Power off Link On
Settings Setup
When the TV is set to Standby mode, the connected equipment is also
automatically set to Standby.
This function will work even if the TV enters Standby mode automatically by
●
auto power standby function.

Standby Power Save

Set Standby Power Save
Settings Setup
The power consumption of the connected equipment in Standby mode is
controlled higher or lower in synchronisation with the TV on / off state to
reduce the consumption.
When the TV is set to Standby mode, the connected equipment is
automatically set to Standby and the power consumption of the connected
equipment is automatically minimised.
When the TV is turned on, the connected equipment is still in Standby mode,
but the power consumption is increased to start the connected equipment
fast.
This function is effective if the connected equipment can change the power
●
consumption in Standby mode and is set to higher consumption.
This function works when
●

Intelligent Auto Standby

Set Intelligent Auto Standby
Settings Setup
When the TV is on, non-used connected equipment goes into Standby mode
automatically to reduce the power consumption. For example, when the input
mode is switched from HDMI or when Speaker Selection is changed to
(except for watching a disc).
This function may not work properly depending on the connected
●
equipment. In this case, set to Off.
in the Setup Menu to use this function.
VIERA Link Settings
in the Setup Menu to use this function.
VIERA Link Settings
On in the Setup Menu to use this function.
VIERA Link Settings
Power off Link
On in the Setup Menu to use this function.
VIERA Link Settings
- 104 -
is set to On.
TV