Panasonic Viera TH-42PX74E Operating Instructions Manual page 11

How to Use Menu Functions
■
Menu list
Menu Item
Controls the connected Panasonic equipment
VIERA Link Control
"Easy control only with VIERA remote control" (p. 35)
"Speaker control" (p. 35)
•
You can also access VIERA Link Menu directly using the VIERA Link button on the
Speaker Selection
remote control.
• Basic picture mode (Dynamic / Normal / Cinema)
Viewing Mode
Set for each input signal
Contrast, Brightness,
Adjusts colour, brightness, etc. for each picture mode to suit your taste
Colour, Sharpness
Adjusts tint of image •
Tint
For NTSC signal reception only
Colour Balance Chooses the colour balance of the entire image (Cool / Normal / Warm)
Automatically adjusts colours to vivid ones (Off / On) •
Colour Management
Not valid on PC signal
Picture Noise Reduction
P-NR • Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)
Not valid on HDMI, PC signal or DVB
MPEG NR Automatically reduces noise for watching DTV, DVD and VCD (Off / Min / Mid / Max)
Automatically makes still pictures and slow pictures look more vivid (Off / On)
•
3D-COMB For PAL or NTSC signal reception only
•
Not valid on RGB, S-Video, components, PC and HDMI
Reset to Default
Press the OK button to reset the present Picture Mode to the default settings
Mode Basic sound mode (Music / Speech)
Bass Adjusts the output level of deep bass
Treble Adjusts the output level of high-pitch, shrill sound
Balance Adjusts volume level of right and left speakers
Surround sound settings (Off / On)
Surround
Provides a dynamic enhancer to simulate improved spatial effects
Volume Correction Adjusts volume of individual channel or input mode
Preferred Multi Audio Selects the preferred language for DVB multi audio (depending on the broadcaster)
Select stereo / monaural (Mono / Stereo)
•
• Normally: Stereo
MPX
Stereo signal cannot be received: Mono
•
M1 / M2: Available while mono signal is transmitted
•
Analogue mode only
Select to fi t the input signal (Auto / Digital / Analogue) (p. 33)
Auto
Digital
HDMI1 Input Analogue : HDMI-DVI adapter cable connection
•
• HDMI input mode only
HDMI2 terminal is for digital signal only
•
No setting for HDMI2 available
Reset to Default Press the OK button to reset the present Sound Mode to the default settings
20
Adjustments / Confi gurations (alternatives)
: Automatic detection of digital or analogue sound source
: HDMI cable connection
■
Menu list
Item Adjustments / Confi gurations (alternatives)
Menu
Selects optional colour system based on video signals in AV mode
AV Colour System
(Auto / PAL / SECAM / M.NTSC / NTSC)
DVB Profi le Edit Creates list of favourite programmes (p. 25)
DVB Service List Skips the unwanted DVB channels (p. 25)
Selects which AV terminal is to be used for data communication between this TV and a
Q-Link
compatible recording equipment (AV1 / AV2) (p. 32)
Chooses the signal to be transmitted from the TV to Q-Link
(Analogue / DVB / AV1 / AV2 / Monitor) •
AV1 / AV2 out
Monitor: Image displayed on screen
•
Component, PC and HDMI signals cannot be outputted
Downloads analogue channel information to a Q-Link compatible equipment connected
Download
to the TV
Child Lock Locks a programme channel to prevent access to it (p. 25)
Auto Setup Automatically sets the channels received in the area (p. 27)
Analogue
Edits analogue channels (p. 27)
Programme Edit
DVB Manual
Sets the DVB channels manually (p. 28)
Tuning
Analogue
Sets the analogue channels manually (p. 28)
Manual Tuning
Add New DVB
Adds new DVB services (p. 28)
Services
New Service
Selects whether to give a notifi cation message when a new DVB service is found
(p. 28)
Message
DVB Signal
Checks the DVB signal condition (p. 28)
Condition
Off Timer
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
OSD Language
Changes language for on-screen displays
Selects teletext language (West / East1 / East2)
•
Teletext
West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish
•
East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian
Language •
East2: Czech, Hungarian, Lettish, Polish, Rumanian
Selects the preferred language for DVB subtitles (depending on the broadcaster)
•
Preferred Subtitles
To display subtitles
Teletext
Teletext display mode (TOP (FLOF) / List) (p. 16)
Shipping Condition
Resets all settings, for example, when moving house (p. 29)
Common Interface
Uses to watch pay-TV (p. 23)
System Update
Downloads new software to TV (p. 23)
Power Save
Reduces brightness of picture to economise on power consumption (Off / On)
• Increases the brightness of the side panel (Off / Low / Mid / High)
Side Panel
The recommended setting is "High" to prevent panel "image retention"
Input Labels
Labels or skips each input terminals (p. 30)
Banner Display
Sets how long the information banner (p. 13) stays on screen
•
0 (No display) to 10 sec. in 1-sec. increments
Timeout
VIERA Link
Sets to use VIERA Link functions (Off / On) (p. 34)
Time Zone
Adjusts the time data (p. 23)
Changes the image processing of the panel (depending on the input signal) (50Hz / 100Hz)
•
Refresh Rate
Set to "100Hz" normally
Software License
Displays the software licence information
System Information
Displays the system information of this TV
•
A different menu will be displayed while PC is used.
•
Only available items can be selected.
p. 13
(p. 31)
21