Panasonic Viera TX-P42GT20E Operating Instructions Manual page 36

Plasma television
Table of Contents

Advertisement

How to Use Menu Functions
Menu
SPDIF Selection
MPEG Optical Level
HDMI1 / 2 / 3 / 4 Input
SPDIF Delay
Reset to Defaults
3D Settings
Timer Programming
Off Timer
USB HDD Setup
VIERA Link
HDMI Content
Type
Q-Link
AV1 / AV2 out
Power on Link
Power off Link
Standby Power
Save
Intelligent Auto
Standby
Download
Child Lock
36
Item
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal
(Auto / PCM)
Auto : Dolby Digital Plus and Dolby Digital are output as Dolby Digital Bitstream.
HE-AAC (48 kHz) 5.1ch is output as DTS.
MPEG is output as PCM.
PCM : Digital output signal is fixed to PCM.
For DVB mode, Network video contents (p. 81) or Video mode (p. 70)
Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT terminal as the initial
setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)
Normally, MPEG sound is larger comparing with the other types of audio track.
DVB mode only
Select to fit the input signal (Digital / Analogue) (p. 97)
Digital
Analogue : HDMI-DVI adapter cable connection
HDMI input mode only
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT terminal if the
sound does not synchronize the image
DVB mode only
Press the OK button to reset the present Sound Mode, Balance, Headphone Volume
and Surround to the default settings
Adjusts and sets to view 3D images (p. 30)
Sets a timer to remind watching or record forthcoming programmes (p. 50)
DVB mode only
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 19)
Registers the connected USB HDD and makes the settings for the recording (p. 62)
Sets to use VIERA Link functions (Off / On) (p. 87)
Adjusts the picture settings according to the content type signal from the connected
equipment via HDMI cable (Off / Auto)
This function is available if the connected equipment supports HDMI Content Type.
The content type information will be displayed for several seconds when this function
works.
Selects which AV terminal is to be used for data communication between this TV and a
compatible recorder (AV1 / AV2) (p. 86)
Select the connected terminal to the recorder even it is not compatible with Q-Link.
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / Monitor)
Monitor: Image displayed on screen
Component, PC and HDMI signals cannot be outputted.
Sets to use Power on Link function (Off / On) (p. 86 and p. 87)
Sets to use Power off Link function (Off / On) (p. 86 and p. 87)
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption (Off / On) (p. 88)
This function is available when "VIERA Link" is set to "On" and "Power off Link" is set
to "On".
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption (Off / On (With reminder) / On (No reminder)) (p. 88)
This function is available when "VIERA Link" is set to "On".
Downloads channel, language, country / region settings to a Q-Link or VIERA Link
compatible equipment connected to the TV
DVB-S and DVB-C channel settings cannot be downloaded.
Locks a channel / AV input to prevent access to it (p. 52)
Adjustments / Configurations (alternatives)
: HDMI cable connection

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents