Network Status - Panasonic TX-L42ETW60 User Manual

with / / /
3. Select Connect to device in WPS
To set manually, select
●
4. Select and set WPS(Push button)
access
WPS(Push button):
Set the equipment to WPS (Push button) mode. For details, read the
manual of the equipment.
WPS(PIN):
Enter the PIN code of the equipment.
If the connection has failed, check the settings and positions of the
●
equipment. And then, follow the on-screen instructions.
■
Change settings
You can set up Network
Channel setting method
Follow the on-screen instructions and set manually.
Set Reset settings
●
= Note =
You cannot connect the internet service while the TV is set to
●
Access Point.
You can connect up to 7 devices. But the transfer rate will vary according
●
to communication environment or the numbers of connected equipment.
To confirm the current network settings
●
Home network
Ensure the equipment to connect supports WPS for this setup.
●
WPS: Wi-Fi Protected Setup™
●

Network Status

Displays and checks the network status (MAC Address, current network
settings, etc.).
1. Display the menu with
2. Select Network
3. Automatically testing is done and the
Try Again:
Performs automatic testing of the network connection for the TV and
displays the current status again.
and press OK to access
with
Change settings. (see below)
/ WPS(PIN)
name(SSID), Encryption
manually.
to reset the items of
Network settings
MENU
Network Status with
Network Status
- 88 -
/ and press OK
with / and press
key, Wireless type
Change settings.
Network Status
/ and press OK
screen is displayed
to access
OK to
and
Wireless
to access