3) Connect the TV with the access point with
– WPS: Wi-Fi Protected Setup™
– If the connection has failed, check the settings and positions of your
access point. And then, follow the on-screen instructions.
For
WPS(PIN)
●
1) Press
2) Enter the PIN code to the access point
3) Connect the TV with the access point with
For
Manual
●
1) Press
2) You can set up SSID, security type, encryption type, and encryption
key manually
3) Follow the on-screen instructions and set manually
– When you use 11n (5 GHz) for the wireless system between the
built-in wireless LAN and access point, select
type.
To search access points again
●
(blue)
To display / hide information of the highlighted access point
●
It is recommended to select the encrypted access point.
●
4. Enter the encryption key of the access point with
OK
to set
You can set characters using numeric buttons.
●
Press
BACK/RETURN
●
5. The
VIERA Name/IP/DNS Settings
VIERA Name
You can set your favourite name for this TV.
●
This name will be used as the name of this TV on the screen of the other
●
network equipment.
(green)
(yellow)
to store
screen is displayed
- 57 -
OK
OK
AES
for the encryption
/
/
/
and press