Related Manuals for Bifinett LERVIA KH 151
Summary of Contents for Bifinett LERVIA KH 151
- Page 2 KH 151 Operating and safety instructions...
-
Page 7: Safety Advice
SAFETY ADVICE The bag sealer must be connected only to a properly wired 230-240 V socket installed in accordance with the relevant regulations. Never pull the plug out of the socket using the mains cable. The bag sealer must always disconnected from the mains for cleaning or if it develops a fault. The bag sealer is fully insulated. - Page 8 Forming the bag a) Unwind the cable from the cable tidy and insert the plug into the properly wired mains socket installed in accordance with the relevant regulations. b) Open cover and take the film roll out of the compartment. Unroll the film enough to ensure that that the place where the first seal is to be made is positioned over the sealing and cutting wires .
-
Page 9: Statement Of Conformity
Cleaning Before cleaning always disconnect the bag sealer from the mains and ensure that it has cooled. Use a slightly moist cloth for cleaning the outsides of the bag sealer. Never use scouring agents or alcohol for cleaning. If any of the film remains attached to the cutting wire repeat the sealing process again, this time without a film in position. - Page 10 © manual design, photos, translations by ORFGEN Marketing & Communication Essen · Germany www.kompernass.com...
Need help?
Do you have a question about the LERVIA KH 151 and is the answer not in the manual?
Questions and answers
What is the dimensions of the bags
The maximum width of Bifinett LERVIA KH 151 bags is 29 cm. The bag should not be filled higher than 6 cm below the top edge.
This answer is automatically generated