Table of Contents Safety instructions......................4 Danger of electric shock ....................4 Fire hazard ........................5 Danger of injury ......................5 Danger of burning ......................5 Danger of tripping ......................6 Proper use ........................6 Description ........................6 Operation ........................7 Setting the direction of air flow ..................7 Switching on the appliance and setting a time of operation ........7 Setting the room temperature ..................8 Oscillating function ......................8 Switching off the device ....................8...
Safety instructions Danger of electric shock! • Plug the fan heater only in a properly installed, earthed power socket with a voltage of 230 V~, with 50 Hz. • Do not fold or squeeze the power cord. • Always unplug the power cord by grasping the plug, do not pull on the cord itself.
Fire hazard! • Never place the fan heater near combustible materials, liquids, gases or directly under a wall socket. Leave room on all sides and at least one meter above the appliance. • Do not cover the appliance while it is in operation. Clean it at regular inter- vals.
Danger of tripping • Place the power cord in such a way that no one will step or trip on it. • Do not use an extension cord. Proper use The fan heater serves the purpose of heating and ventilating living spaces. This fan heater is designed solely for use in private households and may only be used in such.
Operation Remove the electric fan heater from the transportation packaging. Place the fan heater on a flat surface. Plug in the power cord. Turn the function switch (centre) to the right. The fan will turn on and the control light will illuminate in red.
Setting the room temperature Set the timer to the desired period of operation or to “on” (see above). Turn the thermostat controller to maximum position. Once the required room temperature is reached... Turn back the thermostat controller until a „click“ can be heard and the fan heater is switched off.
Danger of burning! Carry the fan heater only by the handle provided for this purpose. Should you wish to transport the fan heater, carry it only by the handle provided for this purpose. Caution! Pack the fan heater only when it has cooled. Otherwise you could burn yourself and damage objects.
Rectifying malfunctions Symptom Possible cause and remedy The fan heater The room temperature is higher than that which has been will not set with the thermostat controller. Set the thermostat turn on controller to a higher setting. A household fuse is defective. Check the fuses and reset them if necessary.
Technical data Voltage 230V~, 50 Hz Rated power 2000 W Guarantee and service Kindly consult the supplementary sheet Guarantee for the conditions of the gua- rantee and the service address. Manufacturer and declaration of conformity Kompernaß Handelsgesellschaft mbH, Burgstraße 21, D-44867 Bochum, Germany, hereby declares this product to be in accordance with the following standards and directives: •...
Need help?
Do you have a question about the LERVIA KH 1149 and is the answer not in the manual?
Questions and answers