Connecting With A Hdmi Cable - LG 42PT2 Owner's Manual

CONNECTiNg WiTh a hdmi CaBlE

Connect the HDMI output of the external equip-
1
ment (digital set-top box, DVD, etc.) to hdmi/dVi
iN 1, hdmi iN 2 or hdmi iN 3 (Except for
42/50PT2***, 50PV2***)
AUDIO IN
(RGB/DVI)
2
Turn on the external equipment.
RGB IN (PC)
/DVI IN
Select hdmi1, hdmi2 or hdmi3 (Except for
3
RS-232C IN
42/50PT2***, 50PV2***) input source using the
(CONTROL&SERVICE)
iNPuT button on the remote control.
AUDIO IN
(RGB/DVI)
/DVI IN RGB IN (PC)
RS-232C IN
(CONTROL&SERVICE)
! NOTE
►Check that your HDMI cable is High Speed HDMI Cable.
2
If the HDMI cables are not High Speed HDMI Cable, flickering or no screen display can result.
Please use the High Speed HDMI Cable.
?
► HDMI mode supports PCM audio format only.
► Audio format was reseted to Dolby/DTS/Bitstrem in DVD Player or STB, it should be changed to PCM.
► We recommend using under 10m of the HDMI cable. When using over the length, connect an ampli-
fier or repeater.
► If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
jack on the TV.
AV IN 1
ANTENNA
IN
AV IN 1
ANTENNA
IN
DVI-PC OUTPUT AUDIO
AV IN 1
AUDIO IN
(RGB/DVI)
RGB IN (PC)
/DVI IN
RS-232C IN
(CONTROL&SERVICE)
1
AUDIO IN
(RGB/DVI)
RGB IN (PC)
/DVI IN
RS-232C IN
(CONTROL&SERVICE)
ANTENNA
IN
AV IN 1
S-VIDEO
R
OUT
SWIT
R
3