28
System Setting
Settings for Digital TV
To use DTV functions, this recorder needs some
settings in advance.
Cable Setting (Auto Tuning)
1. Press HOME (n).
2. Use A/D to select [Setup], and press ENTER
(b).
3. Use W/S to select [DTV], and press ENTER
(b).
4. Use W/S to select [Cable Setting], and press
ENTER (b).
5. Input the password using numerical buttons. If
3
you have not set your password yet, input "1111"
and press ENTER (b).
6. Use W/S to select the [Auto Tuning] and press
ENTER (b).
7. Use W/S to select a country or automatic
numbering option and then use W/S/A/D
to select [Automatic Numbering].
Then press ENTER (b).
8. Use A/D to select an option among [Network
Tuning] or [Full Tuning]], and press ENTER (b).
Select the [Setting], and press ENTER (b).
Unlike typical Tuning, Network Tuning has
Network ID setup function in Frequency, so you
can search a Channel quickly and easily.
[Frequency]
Frequency including All of the information
channels. Frequency matches the Network ID.
[Symbol rate]
Function to match Operator's service bit rate.
Depending on Demod performance, This
function is unavailable.
[Network ID]
Essential information to getting entire channel
Frequency and TS ID. Essential information for
comprising entire Cable channel.
Select [Close] and press ENTER (b) to stop the
scanning programmes.
9. Use W/S to select [Start], and press ENTER
(b)to begin the channel search.