Before Use; Unpacking & Installing - LG MS2839AC Owner's Manual

8

BEfORE UsE

BEFOrE uSE
unpacking & Installing
By following the basic steps on these two pages you will be able to quickly check that your oven is operating
correctly. Please pay particular attention to the guidelines on where to install your oven. When unpacking
your oven make sure you remove all accessories and packing materials. Check to make sure that your oven
has not been damaged during shipping.
1
Unpack your oven and place it on a flat level surface.
Glass tray
Roller rest
Rack
2
Place the oven on the level location of your choice with
more than 85 cm height but make sure there is at least 20
cm of space on the top and 10 cm at the rear for proper
ventilation. The front of the oven should be at least 8 cm
from the edge of the surface to prevent tipping.
An exhaust outlet is located on bottom or side of the oven.
Blocking the outlet can damage the oven.
CAUTION
• THIS OVEN SHOULD NOT BE USED FOR COMMERCIAL CATERING PURPOSES.
3
Plug your oven into a standard household socket. Make sure your oven is the only appliance connected
to the socket. If your oven does not operate properly, unplug it from the electrical socket and then
plug it back in.
4
Open your oven door by pulling the door handle. Place the rotating ring inside the oven and place the glass
tray on top.
5
Fill a microwave safe container with 300 ml (1/2 pint) of water.
Place on the glass tray and close the oven door.
If you have any doubts about what type of container to use
please refer to Page 10.
STEAMER
Steam cover
Steam plate
Steam water bowl
(Metal tray)