Picture Adjustment; Sound Adjustment (Option) - LG Colour Television Owner's Manual

Note: Picture menu options are not available for
the RGB input source.
PSM (Picture Status Memory)
You can also recall a desired picture (
Standard , Mild , Game or
ton on the remote control. The picture
Standard , Mild and Game
good picture reproduction at the factory and can-
not be changed.
CSM (Colour Status Memory)
You can select the picture colour status; standard,
reddish, greenish or bluish, as you prefer.
Eye (option)
When the eye function is on, the most suitable pic-
ture is automatically adjusted according to the sur-
rounding conditions.
At this time the display

Sound adjustment (option)

SSM (Sound Status Memory)
Sound Frequency Adjustment
Press the G G button in User
User sub menu.
You can also recall a desired sound (
Movie , Speech or User ) with SSM/
the remote control. The sound
Movie and Speech are programmed for good
sound reproduction at the factory and cannot be
changed.
Note : If you press the SSM/
ing appropriate adjustment on the
menu, the display User
even though you have already set a factory preset
setting; Flat , Music , Movie
Turbo sound selection
When this function is on, the sound will be more
emphasized and amplified than normal sound.
X-WAVE (Wireless Sound) (option)
You can also listen to the sound through the FM
receiver.
Note:
a. If the reception is poor or weak, select a dif-
ferent frequency.
b. For best results, there should be no more than
5m (16.4ft) between the TV and FM Receiver.
c. In certain areas, the FM transmitter ability may
be weak, such as near a broadcast tower.
d. The reception sensitivity may depend on the
kinds of receiver(FM radio).
Sound output selection
In AV mode, you can select output sound for the
left and right loudspeakers.
Repeatedly press the I/II/
*
sound output.
L+R :Audio signal from audio L input is sent to left
loud-speaker and audio signal from audio R
input is sent to right loud-speaker.
L+L :Audio signal from audio L input is sent to left
and right loud-speakers.
R+R :Audio signal from audio R input is sent to
left and right loud-speakers.
Stereo/Dual reception
When a programme is selected, the sound infor-
6

Picture adjustment

appear continuously but the display
appears each time the picture condition changes.
Note :
a. If you press the PSM or TURBO PICTURE
Dynamic ,
User ) with PSM but-
Dynamic ,
b. EYE function is not available for RGB input source.
are programmed for
Turbo picture selection (option)
When this function is on, the picture will be more
brilliant and distinct than normal picture.
Repeatedly press the TURBO PICTURE button to
switch on or off.
Note :
a. If you press the PSM button with the Turbo
b. TURBO PICTURE function is not available for
in green does not
mation for the station appears after the pro-
gramme number and station name disappear.
to display the
Flat , Music ,
button on
*
Flat , Music ,
Mono sound selection
button after mak-
*
In stereo reception if the stereo signal is weak,
User sub
you can switch to mono by pressing the I/II/
automatically appears
ton twice. In mono reception the depth of sound is
improved. To switch back to stereo, press the
or Speech .
I/II/
Language selection for dual language broadcast
(option)
If a programme is received in two languages (dual
language), you can switch to
DUAL I+II
DUAL I
the loudspeakers.
DUAL II
guage to the loudspeakers.
DUAL I+II
loudspeaker.
NICAM reception (option)
If your set is equipped with the receiver for NICAM
reception,
Instantaneous Companding Audio Multiplex) digi-
tal sound can be received.
Sound output can be selected according to the
type of received broadcast by pressing the I/II/
button repeatedly.
button to select the
1. When NICAM mono is received, you can
2. When NICAM stereo is received, you can
3. When NICAM dual is received, you can select
button with the eye function, the eye function
is automatically switched off.
picture function, the Turbo picture function is
automatically switched off.
RGB input source.
Broadcast On Screen Display
Mono MONO
Stereo STEREO
Dual DUAL I
button twice again.
*
DUAL I
by pressing the I/II/
sends the primary broadcast language to
sends the secondary broadcast lan-
sends a separate language to each
the high quality
select NICAM MONO or FM MONO.
select NICAM STEREO or FM MONO. If the
stereo signal is weak, switch to FM mono.
NICAM DUAL I , NICAM DUAL II
NICAM DUAL I+II or MONO
mono is selected the display
on the screen.
in yellow
but-
*
, DUAL II or
button repeatedly.
*
NICAM (Near
*
or
. When FM
MONO appears