Table of Contents
Advertisement
Channel Set
The unit tunes automatically after you plug it in and turn it on for
the first time (Plug in Auto Tuning lpage 15), but you can start the
process again if necessary.
Preparations
≥Select any program position except "A1" or "A2".
Operations
While the VCR MENU is displayed
1
Select "CHANNEL SET" by pressing [Cursor]34
and then press [ENTER].
ª ANTENNA SYSTEM
2
Select "ANTENNA
SYSTEM" by pressing
[Cursor]34 and then
press [ENTER].
3
Press [Cursor]34 to
select "TV" or "CATV" to
suit the type of antenna
you are using.
≥Channels set corresponding
to the antenna system you
select.
This is set automatically
when you do Plug in Auto
Tuning.
To exit the on screen display
Press [MENU] three times .
ª Auto Tuning
Auto tuning searches for TV stations from VHF minimum to UHF
maximum and memorizes every tuned program position. Other
program positions are skipped. (Channel plan lright)
2
Select "AUTO" by
pressing [Cursor]34
and then press [ENTER].
Auto tuning starts. It may take
up to three or more minutes to
complete.
To stop partway through
Press [MENU].
Notes:
≥When Auto Tuning is completed, the on screen display
disappears and the lowest channel position at which a broadcast
can be tuned in is received.
≥If you have not set the clock, the unit will carry out Auto Clock
Setting. The time is displayed on the unit's display when finished.
≥If the unit is not correctly tuned by Auto Tuning, follow the
procedure on the right column.
CHANNEL SET
≥ANTENNA SYSTEM
AUTO
MANUAL
SELECT
:
, ENTER
END
:MENU
ANTENNA SYSTEM
≥TV
CATV
SELECT
:
END
:MENU
2
AUTO CHANNEL SET
PROCEEDING
END
:MENU
29
Settings Using the On Screen Display (continued)
ª Manual Tuning
2
Select "MANUAL" by pressing [Cursor]34 and
then press [ENTER].
3
Press [Cursor]34 to
select "CH" and
[Cursor]2 1 to select the
channel.
4
Press [Cursor]34 to
select "BLANK" and
[Cursor]2 1 to select
"ON" or "OFF".
≥To select the blanking of a program position, select "ON".
≥To restore the channel again, select "OFF".
≥Repeat steps 3 and 4 for another unoccupied program
positions to skip during the selection of the program
positions.
To exit the settings screen
Press [MENU] three times.
Channel plan
TV mode
CHANNEL
CHANNEL
RECEIVED OF
DESIGNATIONS
THE AIR
VHF
2–13
UHF
14–69
CATV mode
CHANNEL
CHANNEL
RECEIVED
DESIGNATIONS
FROM CABLE
BROADCAST
2–13
VHF
CATV LOW
A-5–A-1
BAND
CATV MID/
SUPER
A–W
BANDS
CATV HYPER
AA–FFF
BAND
GGG–WWW
ULTRA
WWWi1–
BAND
WWWi12
100–125
SPECIAL CATV
5A
CHANNEL
MANUAL CHANNEL SET
CH
2
CHANNEL
SELECTION &
INDICATION
ON THE UNIT
2–13
14–69
CHANNEL
SELECTION &
INDICATION
ON THE UNIT
2–13
95–99
14–36
37–65
66–94
100–125
1
Advertisement
Table of Contents
