Pip Operation (Option); Swapping Between Main And Sub Pictures; Programme Selection For Sub Picture; Sub Picture Position Change - LG Colour Television Owner's Manual

PIP operation (option)

Option :
PIP is an optional function, so that only the set with PIP function
can operate.
PIP (Picture in Picture) displays a picture within a picture.
On and off
Press the PIP button to switch on the sub picture.
Press this button again to switch it off.
Input mode selection for sub picture
Press the INPUT button to select the input mode for the sub pic-
ture.
Each time this button is pressed, each input mode for the sub pic-
ture is displayed as shown below.
Programme number
A V1
COMPONENT (option) A V3 A V2

Swapping between main and sub pictures

Press the SWAP button to exchange the main and sub pictures.

Programme selection for sub picture

Press the PR +/- buttons to select a programme for the sub picture.
(In some models, the sub picture programme selection is available
when the sub picture is TV mode.)
Sub picture size
Repeatedly press the SIZE button to select the desired sub picture
size. The sub picture appears as below.
1/16 size of the main picture 1/9 size 1/2 size (option)
Note : When the sub picture size is 1/2 of the main picture, the pic-
ture quality might get poor.
Sub picture freeze
Press the STILL button to freeze motion of the sub picture.
Press this button again to restore motion.

Sub picture position change

Press the POSITION button repeatedly until desired position is
achieved. The sub picture moves clockwise.
25