Menu
Item
Eco Mode
P-NR
3D-COMB
3D Settings
Screen Display
1080p Pure Direct
Intelligent Frame
Creation
24p Smooth Film
Film Cadence
Detection
3D Refresh Rate
Side Panel
Adjustments / Configurations (alternatives)
Automatic Brightness Control function
Adjusts picture settings automatically depending on ambient lighting conditions
[Off] / [On]
Picture Noise Reduction
Reduces unwanted picture noise and flicker noise in the contoured parts of a
picture [Off] / [Min] / [Mid] / [Max] / [Auto]
●
Not valid when [Viewing Mode] is set to [Game] or [1080p Pure Direct] is set to
[On]
Makes still or slow moving pictures more vivid [Off] / [On]
●
Occasionally, while viewing still or slow moving pictures, colour patterning may
be seen. Set to [On] to display sharper and more accurate colours.
●
For PAL / NTSC signal reception in TV mode or from composite (except 3D
mode)
Adjusts and sets to view 3D images (p. 35)
Turns the screen off when you select [Off]
[Off] / [On]
●
The sound is active even if the screen turns off.
●
Press any buttons (except Standby) to turn the screen on.
●
This function is effective in reducing power consumption when listening to the
sound without watching the TV screen.
Reproduces the original image quality in detail for 1080p (HDMI) input signal
[Off] / [On]
●
Not valid on 3D mode
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth [Off] / [Min] / [Mid] / [Max]
●
Depending on the contents, images may be noisy. To prevent the noise, change
the setting.
●
Not valid when [Viewing Mode] is set to [Game]
Automatically compensates the picture frame rate to make the 24p source movie
images smooth [Off] / [Min] / [Mid] / [Max]
●
This is available only for 24p signal input and displayed instead of [Intelligent
Frame Creation].
●
Not valid when [Viewing Mode] is set to [Game]
Improves vertical resolution for movie images [Off] / [On]
●
This function is available for the interlaced signal (except in VIERA Connect or
when [Viewing Mode] is set to [Game]).
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear [Auto] / [100Hz] / [120Hz]
[100Hz]:
If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
[120Hz]:
If light appears to flicker under fluorescents (or dimmers) of 60 Hz.
Adjusts the brightness of the side panel [Off] / [Low] / [Mid] / [High]
●
The recommended setting is [High] to prevent panel "image retention".
39