Panasonic Viera TX-P50VT50B Operating Instructions Manual page 49

Menu Item
TV Guide View
Eco Navigation
Recording Setup
Bluetooth Setup
Pairing
Cursor Settings
VIERA Link
HDMI Content
Detection
AV1 out
Standby Power
Save
Intelligent Auto
Standby
Q-Link Download
Child Lock
Favourites Edit
Channel List
Region Channel
Edit
Adjustments / Configurations (alternatives)
Changes the layout of TV Guide [Normal] / [Full] / [Info]
[Normal]: Default TV Guide screen
[Full]: Displays channels and programmes full-screen without the operation guide
[Info]: Displays details of the selected programme at the bottom without the
operation guide
Automatically sets the TV to the most suitable energy-saving mode
●
If you press the OK button, the following items are set as below:
[C.A.T.S.], [VIERA Link], [Standby Power Save], [Power Save]
[Intelligent Auto Standby]
[Auto Standby] [2 hours]
Settings for the recording feature of the USB HDD / SD Card (p. 75)
Settings for the specific devices supporting Bluetooth wireless technology (p. 112)
Registers the VIERA Touch Pad Controller (supplied) to this TV
●
Only 1 touch pad controller can be registered.
Sets for the cursor of the touch pad controller
Sets to use VIERA Link functions [Off] / [On] (p. 100)
Automatically adjusts the picture settings according to the received HDMI content
via HDMI cable [Off] / [Auto]
●
This function is available if the connected equipment supports HDMI Content
Type.
●
The content type information will be displayed for several seconds when this
function works.
Chooses the signal to be transmitted from the TV to Q-Link
[TV] / [AV2] / [Monitor]
[Monitor]: Image displayed on screen
● Component and HDMI signals cannot be output.
Controls the connected equipment to reduce power consumption in Standby
[Off] / [On] (p. 101)
●
This function is available when [VIERA Link] is set to [On].
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p. 101)
●
This function is available when [VIERA Link] is set to [On].
Downloads analogue channel information to a Q-Link compatible equipment
connected to the TV
Applies access control for channels or inputs to prevent unwanted access (p. 66)
Creates a list of favourite channels (p. 59)
●
Not valid on Analogue mode
Skips the unwanted channels or edits channels (p. 60)
Replaces your regional channels with the available channels from another region
(p. 59)
●
For freesat mode
[On (No reminder)]
[On]
49