Dvd Setup - LG 32LP1DC Owner's Manual

Installation
NOTE: All cables shown are not included with the TV
When connecting with a S-Video cable
TV Back
S-VIDEO
R
COMPONENT1
R L
AUDIO INPUT
1
DVD
S-VIDEO
When connecting with a component cable
TV Back
DIGITAL AUDIO
S-VIDEO
(OPTICAL)
OUTPUT
COMPONENT1/DVI
R
INPUT
AUDIO INPUT
2-2
DIGITAL AUDIO
OPTICAL (R) AUDIO (L)
Select 2-1 or 2-2
connector.
18
DVI INPUT
(PC/DTV INPUT)
AUDIO VIDEO
L/MONO
VIDEO1
Antenna
VIDEO INPUT
2
(R) AUDIO (L)
DVI INPUT
(PC/DTV INPUT)
AUDIO VIDEO
R L/MONO
VIDEO1
COMPONENT1
L
Antenna
VIDEO INPUT
2-1 1
DVD
B R
, depending on your DVD

DVD Setup

Connect the S-VIDEO output of the DVD to the
1
S-VIDEO input on the set.
Connect the audio outputs of the DVD to the
2
AUDIO input jacks on the set.
Turn on the DVD player, insert a DVD.
3
Select Video1 input source with using the
4
TV/VIDEO button on the remote control.
- If connected to IN 2 input (TV front), select
Video 2 input source.
Refer to the DVD player's manual for operating
5
instructions.
Connect the video outputs (Y, P
1
to the COMPONENT1 VIDEO (Y, P
on the set.
Connect the audio outputs of the DVD to the
2-1
COMPONENT1 AUDIO jacks on the set.
Connect the optical audio output of the DVD to
2-2
the DIGITAL AUDIO COMPONENT1/DVI INPUT
jack on the set.
3 Turn on the DVD player, insert a DVD.
Select Component 1 input source with using the
4
TV/VIDEO or COMP/RGB/DVI button on the
remote control.
- If connected to COMPONENT2 (TV side), select
Component 2 input source.
Refer to the DVD player's manual for operating
5
instructions.
• Component Input ports
To get better picture quality, connect a DVD player
to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
• Digital Audio will not work for Component 2 input
source.
• Digital Audio operation has priority if Digital Audio
and AUDIO L/R are connected at the same time.
, P ) of the DVD
B R
, P ) jacks
B R
Y P P
B R
Y Pb Pr
R-Y
Y B-Y
Cr
Y Cb
Y P P
R
B