SOuNd & laNguagE CONTrOl
NiCam rECEPTiON
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
1
When NiCam mono is received, you can select NiCam mONO or Fm mONO.
When NiCam stereo is received, you can select NiCam STErEO or Fm mONO.
2
If the stereo signal is weak, switch to Fm mONO.
When NiCam dual is received, you can select NiCam dual i, NiCam dual ii or NiCam
3
dual i+ii or Fm mONO.
SPEaKEr SOuNd OuTPuT SElECTiON
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeak-
ers.
Select the sound output.
l+r: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input
is sent to the right loudspeaker.
l+l: Audio signal from audio L input is sent to left and right loudspeakers.
r+r: Audio signal from audio R input is sent to left and right loudspeakers.
68