Advertisement
●
before using your Kenwood
Don't use the hob plate as a
appliance
worksurface.
●
●
Read these instructions carefully and
Never use the hob plate for storage.
●
retain for future reference.
Do not use the induction hob if the
●
Remove all packaging and any
hob plate is broken or cracked in
labels.
any way.
●
important note - medical
Do not put hot or sharp implements
implants
or pans onto the control panel.
●
●
The induction hob generates short-
Never put paper, aluminium foil,
range magnetic fields. If any user or
cloth, plastic materials or other
person in close proximity has a
unrelated objects on the hob plate
pacemaker or other active implants,
when the induction hob is in use or
please consult a doctor before use
is hot. Foil used to cover items
concerning any possible
during cooking should not be
incompatibility to prevent any risk to
allowed to come in direct contact
health.
with the hob plate.
●
For safety, never leave the handle of
safety
your pan sticking out over the
worksurface.
●
Do not immerse the appliance,
●
Make sure the underside of the
supply cord or plug in water or other
cooking pan and the hob plate are
liquid.
clear from water, grease or other dirt
●
Never use a damaged appliance,
before cooking.
cord or plug. Get it checked or
●
Do not use pans with rough bases
repaired: see 'service'.
as these may scratch the hob plate.
●
Do not leave the appliance
●
Do not allow the air entry or air vents
unattended when in use.
to be covered or blocked in any way.
●
Do not let the cord hang over the
Always ensure that there is adequate
edge of the table or worksurface or
ventilation around the induction hob
touch hot surfaces.
during operation.
●
Always unplug the appliance when
●
The induction hob should not be
not in use or before cleaning.
used near or below curtains and
●
Make sure that electrical cords
other combustible materials.
connecting other appliances in the
●
Never unplug the induction hob
proximity cannot come into contact
during operation before switching it
with the induction hob.
off first. If the on/off button is lit for a
●
During and after use of the induction
long time (i.e. if the appliance is in
hob, certain parts will become very
operation or a protective condition),
hot. The hob plate will remain hot
first press the on/off button to turn
from residual heat. Do not touch hot
off the appliance and remove the
parts.
plug after the fan has stopped.
●
The pan and contents will remain hot
●
Never use the appliance on a gas
after use.
stove or on stainless steel or iron
●
After removing the pan from the
worktops/surfaces.
induction hob, place on a heat
●
Do not place this appliance on or
resistant surface.
near a naked flame, hot plate or in a
●
Do not scratch the hob plate with
heated oven.
sharp objects.
2
Advertisement
