Advertisement
Controlling the iPod
When an audio component compatible with the input to
Kenwood digital audio player is connected to this unit, the
iPod can be controlled from the audio component or its
remote control unit. Please also read the instruction manual
for the connected audio component.
1. Mount an iPod on this unit.
2. Press the [iPod/D.AUDIOE] or
[D.AUDIOE] button of the audio component
to start playback of the iPod.
Operations during iPod playback
Pause/ resume playback
Press the [iPod/D.AUDIOE] or [D.AUDIOE]
button.
Fast forward/ fast reverse
Press and hold the [G] or [H] button.
Skip forward/ skip backward/ skip to the
beginning of current track
To skip a track backward or forward: Press the
[G] or [H] button.
To skip to the previous track : Press the [G]
button successively twice or more.
To return to the beginning of the current track:
Press the [G] button once.
To select a album
To skip to the previous album: Press the [PREV.],
%
%
[MULTI CONTROL
] or [FOLDER
] button.
To skip to the next album: Press the [NEXT],
fi
fi
[MULTI CONTROL
] or [FOLDER
] button.
The operation varies depending on the model of iPod.
Model other than iPod touch iPod touch
The operation is available when one
The album is switched to the next album
of the following items is selected.
found by following the alphabetical
order of track names.
Browse item
Selection
– Example
Track-A1 ...... Album-A
Artists, Composers
All Albums
Track-B1 ...... Album-B
Albums, Compilations
All Songs
Track-B2 ...... Album-B
Genres
All Artists
Track-C1 ...... Album-C
PAD-iP7
⁄
• Before mounting or removing the iPod, be sure to minimize
the volume level of the connected audio component.
• The volume setting made on the iPod are invalid while it is
mounted on this unit.
• If the volume of the iPod is felt louder or lower than other
sources, adjust the input level from the connected audio
component.
• Do not remove the iPod in the middle of playback. Otherwise,
malfunction may result.
• Some of the iPod functions may not be controllable
depending on the iPod model.
• Audio components compatible with digital audio player link:
AX-7, AX-8, C-707i, K-501USB, K-511USB, RD-K501USB,
RD-K511USB, R-K1, R-K1000, R-K711 (as of September 2008)
8
In case of diffi culty
If a trouble such as the impossibility of switching the power
on or operating occurs, check the description of applicable
symptom in the following list before calling for service.
Symptom
Cause/Remedy
The power
The AC adapter may be connected
cannot be
improperly.
switched ON.
Connect it properly. (Page 6)
iPod cannot be
A wrong dock adapter may be used.
fit properly into
Check if the correct dock adapter is
the unit.
used. (Page 7) Also check the connector
sections of the iPod and this unit, then
reconnect them properly.
The iPod audio
The iPod may be connected improperly.
cannot be
Remove the iPod from this unit and
monitored.
mount it again. (Page 7)
The iPod cannot
The iPod may be connected improperly.
be recharged.
Remove the iPod from this unit and
mount it again. (Page 7)
The iPod video
The video selector switch may be set
cannot be
improperly.
monitored.
Set it according to the connected
component. (Page 5)
The video connection cable may be
connected improperly.
Check the connection of this unit.
(Page 6)
Specifi cations
Power ..................DC 5 V (AC adaptor: AC 230 - 240 V, 50 Hz)
Video output format .......................................................... NTSC/PAL
Composite video output level .............................1 Vp-p / 75 Ω
Component video output level
Y-signal ......................................................................1 Vp-p / 75 Ω
CB/ CR-signal .....................................................0.7 Vp-p / 75 Ω
Dimensions .........................................................................W : 103 mm
Weight (net) ......................................................................................120 g
Notes:
• Kenwood follows a policy of continuous advancements in
development. For this reason specifications may be changed
without notice.
Information on Disposal of Old Electrical and
Electronic Equipment and Batteries (applicable
for EU countries that have adopted separate
waste collection systems)
Products and batteries with the symbol
(crossed-out wheeled bin) cannot be disposed
as household waste.
Old electrical and electronic equipment and
batteries should be recycled at a facility capable
of handling these items and their waste
byproducts.
Contact your local authority for details in
locating a recycle facility nearest to you.
Proper recycling and waste disposal will help
conserve resources whilst preventing
detrimental effects on our health and the
environment.
Notice: The sign "Pb" below the symbol for
batteries indicates that this battery
contains lead.
9
H : 31 mm
D : 65 mm
English
Advertisement
