Advertisement
4
Operation Guide
1
Refer to above system connection diagram, set up
your system in 3D;
2
Press the Power Button to turn on your 3D glasses;
3
Verify if the image appears in 3D, if not, please
recheck the connection and setting of your 3D
system;
4
Verify if 3D image are eye-strain free, if not, change
the 3D sync invert setting;
5
Turn off your 3D glasses to save battery if you do not
want to use the glasses.
Replacing Battery
When the battery life has less than 2 hours left, LCD
lenses will blink five times in once per second when you
turn on your 3D glasses,please change the battery which
is assembled in a drawer-like battery holder with a new
CR2032 lithium/manganese dioxide battery.
1
Press the tab of drawer-like battery holder as the
arrow mark indicated, and then pull out the battery
holder together with the battery.
2
Replace the old battery, and reassemble a new
CR2032 battery in correct polarity.
3
Push the battery holder with the new battery back to
its original position.
Advertisement
