Displaying Pc Screen On Tv - Panasonic TX-L42DT50Y Operating Instruction

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
To connect PC (p. 97)
Select the external input
1
Select [PC]
2
Input Selection
AV1
AV2
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
SD Card/USB
PC menu setting
To make settings
Menu Item
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset to Defaults
Other items (p. 38 - 45, 63)
Note
For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI
cable (p. 105).
62
Corresponding signals
If [H-freq.] or [V-freq.] is shown in red, the signals may not be supported.
"How to Use Menu Functions" (p. 37)
Adjustments / Configurations (alternatives)
Switches to a wide view:
VGA (640 × 480 pixels) / WVGA (852 × 480 pixels) / XGA (1,024 × 768 pixels) /
WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
Options change depending on signals
Set to the minimum level if noise occurs
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
Adjust after Clock adjustment
Set to the minimum level if noise occurs
Chooses another synchronous signal if the image is distorted
[H & V] / [On Green]
[H & V]: by the horizontal and vertical signals from your PC
[On Green]: by the green signal from your PC (if available)
Press the OK button to reset [PC Setup] to the default settings
select
access
(p. 105)