Ematic ESB210 User Manual

User Manual

Ematic - ESB210
Attaching the Stand
Connect
Slide the supplied stand onto
the bottom of the main unit
until you hear a click.
Disconnect
Press the button downwards
to disconnect the stand from
the unit.
Use the Non-Skid Pad
You can also use the non-skid pad to
install this unit on a shelf or TV Stand
Be sure to put the bigger part
of the pad towards the front
panel of the unit.

Getting Started

Connecting Your Device
Connect the Soundbar and
the audio line.
Powering On
Make sure that the Soundbar is
plugged into a power source.
Push the on/off button on the
Soundbar or on the remote.
The Display Screen will light up
when powered on.